use strict;
|
|
# Configuration file for amavisd-new
|
# Defaults modified for the Debian amavisd-new package
|
# $Id: amavisd.conf,v 1.27.2.2 2004/11/18 23:27:55 hmh Exp $
|
#
|
# This software is licensed under the GNU General Public License (GPL).
|
# See comments at the start of amavisd-new for the whole license text.
|
|
#Sections:
|
# Section I - Essential daemon and MTA settings
|
# Section II - MTA specific
|
# Section III - Logging
|
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
|
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
|
# Section VI - Resource limits
|
# Section VII - External programs, virus scanners, SpamAssassin
|
# Section VIII - Debugging
|
|
#GENERAL NOTES:
|
# This file is a normal Perl code, interpreted by Perl itself.
|
# - make sure this file (or directory where it resides) is NOT WRITABLE
|
# by mere mortals (not even vscan/amavis; best to make it owned by root),
|
# otherwise it represents a severe security risk!
|
# - for values which are interpreted as booleans, it is recommended
|
# to use 1 for true, undef for false.
|
# THIS IS DIFFERENT FROM OLD AMAVIS VERSIONS where "no" also meant false,
|
# now it means true, like any nonempty string does!
|
# - Perl syntax applies. Most notably: strings in "" may include variables
|
# (which start with $ or @); to include characters @ and $ in double
|
# quoted strings, precede them by a backslash; in single-quoted strings
|
# the $ and @ lose their special meaning, so it is usually easier to use
|
# single quoted strings (or qw operator) for e-mail addresses.
|
# Still, in both cases a backslash needs to be doubled.
|
# - variables with names starting with a '@' are lists, the values assigned
|
# to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
|
# note the comma-separation and parenthesis. If strings in the list
|
# do not contain spaces nor variables, a Perl operator qw() may be used
|
# as a shorthand to split its argument on whitespace and produce a list
|
# of strings, e.g. qw( one@foo example.com three ); Note that the argument
|
# to qw is quoted implicitly and no variable interpretation is done within
|
# (no '$' variable evaluations). The #-initiated comments can NOT be used
|
# within a string. In other words, $ and # lose their special meaning
|
# within a qw argument, just like within '...' strings.
|
# - all e-mail addresses in this file and as used internally by the daemon
|
# are in their raw (rfc2821-unquoted and non-bracketed) form, i.e.
|
# Bob "Funny" Dude@example.com, not: "Bob \"Funny\" Dude"@example.com
|
# and not <"Bob \"Funny\" Dude"@example.com>; also: '' and not '<>'.
|
# - the term 'default value' in examples below refers to the value of a
|
# variable pre-assigned to it by the program; any explicit assignment
|
# to a variable in this configuration file overrides the default value;
|
|
|
#
|
# Section I - Essential daemon and MTA settings
|
#
|
|
# $MYHOME serves as a quick default for some other configuration settings.
|
# More refined control is available with each individual setting further down.
|
# $MYHOME is not used directly by the program. No trailing slash!
|
$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
|
|
# $mydomain serves as a quick default for some other configuration settings.
|
# More refined control is available with each individual setting further down.
|
# $mydomain is never used directly by the program.
|
$mydomain = 'example.com'; # (no useful default)
|
|
# $myhostname = 'host.example.com'; # fqdn of this host, default by uname(3)
|
|
# Set the user and group to which the daemon will change if started as root
|
# (otherwise just keeps the UID unchanged, and these settings have no effect):
|
$daemon_user = 'amavis'; # (no default (undef))
|
$daemon_group = 'amavis'; # (no default (undef))
|
|
# Runtime working directory (cwd), and a place where
|
# temporary directories for unpacking mail are created.
|
# if you change this, you might want to modify the cleanup()
|
# function in /etc/init.d/amavisd-new
|
# (no trailing slash, may be a scratch file system)
|
$TEMPBASE = $MYHOME; # (must be set if other config vars use is)
|
#$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
|
|
# $helpers_home sets environment variable HOME, and is passed as option
|
# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
|
# on a normal persistent file system, not a scratch or temporary file system
|
#$helpers_home = $MYHOME; # (defaults to $MYHOME)
|
|
# Run the daemon in the specified chroot jail if nonempty:
|
#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
|
|
$pid_file = "/var/run/amavis/amavisd.pid"; # (default: "$MYHOME/amavisd.pid")
|
$lock_file = "/var/run/amavis/amavisd.lock"; # (default: "$MYHOME/amavisd.lock")
|
|
# set environment variables if you want (no defaults):
|
$ENV{TMPDIR} = $TEMPBASE; # wise to set TMPDIR, but not obligatory
|
#...
|
|
|
# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
|
# both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
|
|
# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
|
# (set host and port number as required; host can be specified
|
# as IP address or DNS name (A or CNAME, but MX is ignored)
|
$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
|
$notify_method = $forward_method; # where to submit notifications
|
|
# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
|
# uncomment the appropriate settings below if using other setups!
|
|
# SENDMAIL MILTER, using amavis-milter.c helper program:
|
# SEE amavisd-new-milter package docs FOR DEBIAN INSTRUCTIONS
|
#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
|
# milter; option -odd is needed to avoid deadlocks
|
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
|
# just a thought: can we use use -Am instead of -odd ?
|
|
# SENDMAIL (old non-milter setup, as relay):
|
#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
|
#$notify_method = $forward_method;
|
|
# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
|
#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
|
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
|
|
# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
|
#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
|
#$notify_method = $forward_method;
|
|
# prefer to collect mail for forwarding as BSMTP files?
|
#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
|
#$notify_method = $forward_method;
|
|
|
# Net::Server pre-forking settings
|
# You may want $max_servers to match the width of your MTA pipe
|
# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
|
# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
|
#
|
$max_servers = 2; # number of pre-forked children (default 2)
|
$max_requests = 10; # retire a child after that many accepts (default 10)
|
|
$child_timeout=5*60; # abort child if it does not complete each task in n sec
|
# (default: 8*60 seconds)
|
|
# Check also the settings of @av_scanners at the end if you want to use
|
# virus scanners. If not, you may want to delete the whole long assignment
|
# to the variable @av_scanners, which will also remove the virus checking
|
# code (e.g. if you only want to do spam scanning).
|
|
# Here is a QUICK WAY to completely DISABLE some sections of code
|
# that WE DO NOT WANT (it won't even be compiled-in).
|
# For more refined controls leave the following two lines commented out,
|
# and see further down what these two lookup lists really mean.
|
#
|
# @bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
|
# @bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
|
#
|
# Any setting can be changed with a new assignment, so make sure
|
# you do not unintentionally override these settings further down!
|
@bypass_spam_checks_acl = qw( . ); # No default dependency on spamassassin
|
|
# Lookup list of local domains (see README.lookups for syntax details)
|
#
|
# NOTE:
|
# For backwards compatibility the variable names @local_domains (old) and
|
# @local_domains_acl (new) are synonyms. For consistency with other lookups
|
# the name @local_domains_acl is now preferred. It also makes it more
|
# obviously distinct from the new %local_domains hash lookup table.
|
#
|
# local_domains* lookup tables are used in deciding whether a recipient
|
# is local or not, or in other words, if the message is outgoing or not.
|
# This affects inserting spam-related headers for local recipients,
|
# limiting recipient virus notifications (if enabled) to local recipients,
|
# in deciding if address extension may be appended, and in SQL lookups
|
# for non-fqdn addresses. Set it up correctly if you need features
|
# that rely on this setting (or just leave empty otherwise).
|
#
|
# With Postfix (2.0) a quick reminder on what local domains normally are:
|
# a union of domains specified in: $mydestination, $virtual_alias_domains,
|
# $virtual_mailbox_domains, and $relay_domains.
|
#
|
@local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
|
# @local_domains_acl = ( ".$mydomain", "my.other.domain" );
|
# @local_domains_acl = qw(); # default is empty, no recipient treated as local
|
# @local_domains_acl = qw( .example.com );
|
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
|
|
# or alternatively(A), using a Perl hash lookup table, which may be assigned
|
# directly, or read from a file, one domain per line; comments and empty lines
|
# are ignored, a dot before a domain name implies its subdomains:
|
#
|
#read_hash(\%local_domains, '/etc/amavis/local_domains');
|
|
#or alternatively(B), using a list of regular expressions:
|
# $local_domains_re = new_RE( qr'[@.]example\.com$'i );
|
#
|
# see README.lookups for syntax and semantics
|
|
|
#
|
# Section II - MTA specific (defaults should be ok)
|
#
|
|
# if $relayhost_is_client is true, the IP address in $notify_method and
|
# $forward_method is dynamically overridden with SMTP client peer address
|
# (if available), which makes it possible for several hosts to share one
|
# daemon. The static port number is also overridden, and is dynamically
|
# calculated as being one above the incoming SMTP/LMTP session port number.
|
#
|
# These are logged at level 3, so enable logging until you know you got it
|
# right.
|
$relayhost_is_client = 0; # (defaults to false)
|
|
$insert_received_line = 1; # behave like MTA: insert 'Received:' header
|
# (does not apply to sendmail/milter)
|
# (default is true (1) )
|
|
# AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
|
# (used with amavis helper clients like amavis-milter.c and amavis.c,
|
# NOT needed for Postfix and Exim or dual-sendmail - keep it undefined.)
|
#$unix_socketname = "/var/lib/amavis/amavisd.sock"; # amavis helper protocol socket
|
$unix_socketname = undef; # disable listening on a unix socket
|
# (default is undef, i.e. disabled)
|
|
# Do we receive quoted or raw addresses from the helper program?
|
# (does not apply to SMTP; defaults to true)
|
#$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
|
#$gets_addr_in_quoted_form = 0; # Bob "Funny" Dude@example.com
|
|
|
|
# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
|
# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
|
$inet_socket_port = 10024; # accept SMTP on this local TCP port
|
# (default is undef, i.e. disabled)
|
# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
|
|
# SMTP SERVER (INPUT) access control
|
# - do not allow free access to the amavisd SMTP port !!!
|
#
|
# when MTA is at the same host, use the following (one or the other or both):
|
$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
|
# (default is '127.0.0.1')
|
@inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
|
# (default is qw( 127.0.0.1 ) )
|
|
# when MTA (one or more) is on a different host, use the following:
|
# @inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
|
# $inet_socket_bind = undef; # bind to all IP interfaces if undef
|
#
|
# Example1:
|
# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
|
# permit only SMTP access from loopback and rfc1918 private address space
|
#
|
# Example2:
|
# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
|
# 127.0.0.1 10/8 172.16/12 192.168/16 );
|
# matches loopback and rfc1918 private address space except host 192.168.1.12
|
# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
|
#
|
# Example3:
|
# @inet_acl = qw( 127/8
|
# !172.16.3.0 !172.16.3.127 172.16.3.0/25
|
# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
|
# matches loopback and both halves of the 172.16.3/24 C-class,
|
# split into two subnets, except all four broadcast addresses
|
# for these subnets
|
#
|
# See README.lookups for details on specifying access control lists.
|
|
|
#
|
# Section III - Logging
|
#
|
|
# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
|
$DO_SYSLOG = 1; # (defaults to false)
|
#$SYSLOG_LEVEL = 'user.info'; # (facility.priority, default 'mail.info')
|
|
# Log file (if not using syslog)
|
$LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
|
|
#NOTE: levels are not strictly observed and are somewhat arbitrary
|
# 0: startup/exit/failure messages, viruses detected
|
# 1: args passed from client, some more interesting messages
|
# 2: virus scanner output, timing
|
# 3: server, client
|
# 4: decompose parts
|
# 5: more debug details
|
#$log_level = 2; # (defaults to 0)
|
|
# Customizable template for the most interesting log file entry (e.g. with
|
# $log_level=0) (take care to properly quote Perl special characters like '\')
|
# For a list of available macros see README.customize .
|
|
# only log infected messages (useful with log level 0):
|
# $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
|
# [? %#V |[? %#F ||, from=[?%o|(?)|<%o>], to=[<%R>|,][? %i ||, quarantine %i]]#
|
# |, from=[?%o|(?)|<%o>], to=[<%R>|,][? %i ||, quarantine %i]]';
|
|
# log both infected and noninfected messages (default):
|
$log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
|
[?%o|(?)|<%o>] -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
|
|
|
#
|
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
|
#
|
|
# Select notifications text encoding when Unicode-aware Perl is converting
|
# text from internal character representation to external encoding (charset
|
# in MIME terminology). Used as argument to Perl Encode::encode subroutine.
|
#
|
# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
|
#$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
|
#
|
# to be used in notification body text: its encoding and Content-type.charset
|
#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
|
|
# Default template texts for notifications may be overruled by directly
|
# assigning new text to template variables, or by reading template text
|
# from files. A second argument may be specified in a call to read_text(),
|
# specifying character encoding layer to be used when reading from the
|
# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
|
# Text will be converted to internal character representation by Perl 5.8.0
|
# or later; second argument is ignored otherwise. See PerlIO::encoding,
|
# Encode::PerlIO and perluniintro man pages.
|
#
|
# $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
|
# $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
|
# $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
|
# $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
|
# $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
|
# $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
|
|
# If notification template files are collectively available in some directory,
|
# use read_l10n_templates which calls read_text for each known template.
|
#
|
# read_l10n_templates('/etc/amavis/en_US');
|
#
|
# Debian available locales: en_US, pt_BR, de_DE, it_IT
|
read_l10n_templates('en_US', '/etc/amavis');
|
|
|
# Here is an overall picture (sequence of events) of how pieces fit together
|
# (only virus controls are shown, spam controls work the same way):
|
#
|
# bypass_virus_checks? ==> PASS
|
# no viruses? ==> PASS
|
# log virus if $log_templ is nonempty
|
# quarantine if $virus_quarantine_to is nonempty
|
# notify admin if $virus_admin (lookup) nonempty
|
# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
|
# add address extensions if adding extensions is enabled and virus will pass
|
# send (non-)delivery notifications
|
# to sender if DSN needed (BOUNCE or ($warn_virus_sender and D_PASS))
|
# virus_lovers or final_destiny==D_PASS ==> PASS
|
# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
|
#
|
# Equivalent flow diagram applies for spam checks.
|
# If a virus is detected, spam checking is skipped entirely.
|
|
# The following symbolic constants can be used in *destiny settings:
|
#
|
# D_PASS mail will pass to recipients, regardless of bad contents;
|
#
|
# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
|
# notified. Effectively we lose mail (but will be quarantined
|
# unless disabled). Losing mail is not decent for a mailer,
|
# but might be desired.
|
#
|
# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
|
# notification (bounce) will be sent to the sender by amavisd-new;
|
# Exception: bounce (DSN) will not be sent if a virus name matches
|
# $viruses_that_fake_sender_re, or to messages from mailing lists
|
# (Precedence: bulk|list|junk);
|
#
|
# D_REJECT mail will not be delivered to its recipients, sender should
|
# preferably get a reject, e.g. SMTP permanent reject response
|
# (e.g. with milter), or non-delivery notification from MTA
|
# (e.g. Postfix). If this is not possible (e.g. different recipients
|
# have different tolerances to bad mail contents and not using LMTP)
|
# amavisd-new sends a bounce by itself (same as D_BOUNCE).
|
#
|
# Notes:
|
# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
|
# for informing the sender about non-delivery, and how informative
|
# the notification can be (amavisd-new knows more than MTA);
|
# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
|
# notification, colloquially called 'bounce') - depending on MTA;
|
# Best suited for sendmail milter, especially for spam.
|
# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
|
# reason for mail non-delivery, but unable to reject the original
|
# SMTP session). Best suited to reporting viruses, and for Postfix
|
# and other dual-MTA setups, which can't reject original client SMTP
|
# session, as the mail has already been enqueued.
|
|
$final_virus_destiny = D_DISCARD; # (defaults to D_BOUNCE)
|
$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
|
$final_spam_destiny = D_REJECT; # (defaults to D_REJECT)
|
$final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
|
|
# Alternatives to consider for spam:
|
# - use D_PASS if clients will do filtering based on inserted mail headers;
|
# - use D_DISCARD, if kill_level is set safely high;
|
# - use D_BOUNCE instead of D_REJECT if not using milter;
|
#
|
# D_BOUNCE is preferred for viruses, but consider:
|
# - use D_DISCARD to avoid bothering the rest of the network, it is hopeless
|
# to try to keep up with the viruses that faker the envelope sender anyway,
|
# and bouncing only increases the network cost of viruses for everyone
|
# - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
|
# - use D_REJECT instead of D_BOUNCE if using milter and under heavy
|
# virus storm;
|
#
|
# Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
|
# to D_BOUNCE.
|
#
|
# The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
|
# and D_PASS made settings $warnvirussender and $warnspamsender only still
|
# useful with D_PASS.
|
|
# The following $warn*sender settings are ONLY used when mail is
|
# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
|
# Bounces or rejects produce non-delivery status notification anyway.
|
|
# Notify virus sender?
|
#$warnvirussender = 1; # (defaults to false (undef))
|
|
# Notify spam sender?
|
#$warnspamsender = 1; # (defaults to false (undef))
|
|
# Notify sender of banned files?
|
#$warnbannedsender = 1; # (defaults to false (undef))
|
|
# Notify sender of syntactically invalid header containing non-ASCII characters?
|
#$warnbadhsender = 1; # (defaults to false (undef))
|
|
# Notify virus (or banned files) RECIPIENT?
|
# (not very useful, but some policies demand it)
|
#$warnvirusrecip = 1; # (defaults to false (undef))
|
#$warnbannedrecip = 1; # (defaults to false (undef))
|
|
# Notify also non-local virus/banned recipients if $warn*recip is true?
|
# (including those not matching local_domains*)
|
#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
|
|
|
# Treat envelope sender address as unreliable and don't send sender
|
# notification / bounces if name(s) of detected virus(es) match the list.
|
# Note that virus names are supplied by external virus scanner(s) and are
|
# not standardized, so virus names may need to be adjusted.
|
# See README.lookups for syntax, check also README.policy-on-notifications
|
#
|
$viruses_that_fake_sender_re = new_RE(
|
qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i,
|
qr'tanatos|lentin|bridex|mimail|trojan\.dropper|dumaru|parite|spaces'i,
|
qr'dloader|galil|gibe|swen|netwatch|bics|sbrowse|sober|rox|val(hal)?la'i,
|
qr'frethem|sircam|be?agle|tanx|mydoom|novarg|shimg|netsky|somefool|moodown'i,
|
qr'@mm|@MM', # mass mailing viruses as labeled by f-prot and uvscan
|
qr'Worm'i, # worms as labeled by ClamAV, Kaspersky, etc
|
[qr'^(EICAR|Joke\.|Junk\.)'i => 0],
|
[qr'^(WM97|OF97|W95/CIH-|JS/Fort)'i => 0],
|
[qr/.*/ => 1], # true by default (remove or comment-out if undesired)
|
);
|
|
# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
|
# - the administrator address may be a simple fixed e-mail address (a scalar),
|
# or may depend on the SENDER address (e.g. its domain), in which case
|
# a ref to a hash table can be specified (specify lower-cased keys,
|
# dot is a catchall, see README.lookups).
|
#
|
# Empty or undef lookup disables virus admin notifications.
|
|
# $virus_admin = undef; # do not send virus admin notifications (default)
|
# $virus_admin = {'not.example.com' => '', '.' => 'virusalert@example.com'};
|
# $virus_admin = 'virus-admin@example.com';
|
$virus_admin = "postmaster\@$mydomain"; # due to D_DISCARD default
|
|
# equivalent to $virus_admin, but for spam admin notifications:
|
# $spam_admin = "spamalert\@$mydomain";
|
# $spam_admin = undef; # do not send spam admin notifications (default)
|
# $spam_admin = {'not.example.com' => '', '.' => 'spamalert@example.com'};
|
|
#advanced example, using a hash lookup table:
|
#$virus_admin = {
|
# 'baduser@sub1.example.com' => 'HisBoss@sub1.example.com',
|
# '.sub1.example.com' => 'virusalert@sub1.example.com',
|
# '.sub2.example.com' => '', # don't send admin notifications
|
# 'a.sub3.example.com' => 'abuse@sub3.example.com',
|
# '.sub3.example.com' => 'virusalert@sub3.example.com',
|
# '.example.com' => 'noc@example.com', # catchall for our virus senders
|
# '.' => 'virusalert@hq.example.com', # catchall for the rest
|
#};
|
|
|
# whom notification reports are sent from (ENVELOPE SENDER);
|
# may be a null reverse path, or a fully qualified address:
|
# (admin and recip sender addresses default to $mailfrom
|
# for compatibility, which in turn defaults to undef (empty) )
|
# If using strings in double quotes, don't forget to quote @, i.e. \@
|
#
|
#$mailfrom_notify_admin = "virusalert\@$mydomain";
|
#$mailfrom_notify_recip = "virusalert\@$mydomain";
|
#$mailfrom_notify_spamadmin = "spam.police\@$mydomain";
|
|
# 'From' HEADER FIELD for sender and admin notifications.
|
# This should be a replyable address, see rfc1894. Not to be confused
|
# with $mailfrom_notify_sender, which is the envelope return address
|
# and should be empty (null reverse path) according to rfc2821.
|
#
|
# The syntax of the 'From' header field is specified in rfc2822, section
|
# '3.4. Address Specification'. Note in particular that display-name must be
|
# a quoted-string if it contains any special characters like spaces and dots.
|
#
|
# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
|
# $hdrfrom_notify_sender = 'amavisd-new <postmaster@example.com>';
|
# $hdrfrom_notify_sender = '"Content-Filter Master" <postmaster@example.com>';
|
# (defaults to: "amavisd-new <postmaster\@$myhostname>")
|
# $hdrfrom_notify_admin = $mailfrom_notify_admin;
|
# (defaults to: $mailfrom_notify_admin)
|
# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
|
# (defaults to: $mailfrom_notify_spamadmin)
|
|
# whom quarantined messages appear to be sent from (envelope sender);
|
# keeps original sender if undef, or set it explicitly, default is undef
|
$mailfrom_to_quarantine = ''; # override sender address with null return path
|
|
|
# Location to put infected mail into: (applies to 'local:' quarantine method)
|
# empty for not quarantining, may be a file (mailbox),
|
# or a directory (no trailing slash)
|
# (the default value is undef, meaning no quarantine)
|
#
|
$QUARANTINEDIR = '/var/lib/amavis/virusmails';
|
|
#$virus_quarantine_method = "local:virus-%i-%n"; # default
|
#$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
|
#
|
#use the new 'bsmtp:' method as an alternative to the default 'local:'
|
#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
|
#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
|
|
# When using the 'local:' quarantine method (default), the following applies:
|
#
|
# A finer control of quarantining is available through variable
|
# $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
|
# or a ref to a hash lookup table, or a regexp lookup table object,
|
# which makes possible to set up per-recipient quarantine addresses.
|
#
|
# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
|
# per-recipient lookup result from the hash table %$virus_quarantine_to)
|
# is/are interpreted as follows:
|
#
|
# VARIANT 1:
|
# empty or undef disables quarantine;
|
#
|
# VARIANT 2:
|
# a string NOT containing an '@';
|
# amavisd will behave as a local delivery agent (LDA) and will quarantine
|
# viruses to local files according to hash %local_delivery_aliases (pseudo
|
# aliases map) - see subroutine mail_to_local_mailbox() for details.
|
# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
|
# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
|
#
|
# * if $QUARANTINEDIR is a directory, each quarantined virus will go
|
# to a separate file in the $QUARANTINEDIR directory (traditional
|
# amavis style, similar to maildir mailbox format);
|
#
|
# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
|
# mailbox. All quarantined messages will be appended to this file.
|
# Amavisd child process must obtain an exclusive lock on the file during
|
# delivery, so this may be less efficient than using individual files
|
# or forwarding to MTA, and it may not work across NFS or other non-local
|
# file systems (but may be handy for pickup of quarantined files via IMAP
|
# for example);
|
#
|
# VARIANT 3:
|
# any email address (must contain '@').
|
# The e-mail messages to be quarantined will be handed to MTA
|
# for delivery to the specified address. If a recipient address local to MTA
|
# is desired, you may leave the domain part empty, e.g. 'infected@', but the
|
# '@' character must nevertheless be included to distinguish it from variant 2.
|
#
|
# This method enables more refined delivery control made available by MTA
|
# (e.g. its aliases file, other local delivery agents, dealing with
|
# privileges and file locking when delivering to user's mailbox, nonlocal
|
# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
|
# will not be handed back to amavisd for checking, as this will cause a loop
|
# (hopefully broken at some stage)! If this can be assured, notifications
|
# will benefit too from not being unnecessarily virus-scanned.
|
#
|
# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
|
# setup, but probably not safe with sendmail milter interface without
|
# precaution.
|
|
# (the default value is undef, meaning no quarantine)
|
|
$virus_quarantine_to = 'virus-quarantine'; # traditional local quarantine
|
#$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
|
#$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
|
#$virus_quarantine_to = 'virus-quarantine@example.com'; # similar
|
#$virus_quarantine_to = undef; # no quarantine
|
#
|
#$virus_quarantine_to = new_RE( # per-recip multiple quarantines
|
# [qr'^user@example\.com$'i => 'infected@'],
|
# [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
|
# [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
|
# [qr/.*/ => 'virus-quarantine'] );
|
|
# similar for spam
|
# (the default value is undef, meaning no quarantine)
|
#
|
$spam_quarantine_to = 'spam-quarantine';
|
#$spam_quarantine_to = "spam-quarantine\@$mydomain";
|
#$spam_quarantine_to = new_RE( # per-recip multiple quarantines
|
# [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
|
# [qr/.*/ => 'spam-quarantine'] );
|
|
# In addition to per-recip quarantine, a by-sender lookup is possible. It is
|
# similar to $spam_quarantine_to, but the lookup key is the sender address:
|
#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
|
|
|
# Add X-Virus-Scanned header field to mail?
|
$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
|
# Leave empty to add no header # (default: undef)
|
$X_HEADER_LINE = "by $myversion (Debian) at $mydomain";
|
|
# a string to prepend to Subject (for local recipients only) if mail could
|
# not be decoded or checked entirely, e.g. due to password-protected archives
|
$undecipherable_subject_tag = '***UNCHECKED*** '; # undef disables it
|
|
$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
|
#$remove_existing_x_scanned_headers= 1; # remove existing headers
|
# (defaults to false)
|
#$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
|
$remove_existing_spam_headers = 1; # remove existing spam headers if
|
# spam scanning is enabled (default)
|
|
# set $bypass_decode_parts to true if you only do spam scanning, or if you
|
# have a good virus scanner that can deal with compression and recursively
|
# unpacking archives by itself, and save amavisd the trouble.
|
# Disabling decoding also causes banned_files checking to only see
|
# MIME names and MIME content types, not the content classification types
|
# as provided by the file(1) utility.
|
# It is a double-edged sword, make sure you know what you are doing!
|
#
|
#$bypass_decode_parts = 1; # (defaults to false)
|
|
# don't trust this file type or corresponding unpacker for this file type,
|
# keep both the original and the unpacked file for a virus checker to see
|
# (lookup key is what file(1) utility returned):
|
#
|
$keep_decoded_original_re = new_RE(
|
# qr'^MAIL$', # retain full original message for virus checking (can be slow)
|
qr'^MAIL-UNDECIPHERABLE$', # retain full mail if it contains undecipherables
|
qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
|
# qr'^Zip archive data',
|
);
|
|
# Checking for banned MIME types and names. If any mail part matches,
|
# the whole mail is rejected, much like the way viruses are handled.
|
# A list in object $banned_filename_re can be defined to provide a list
|
# of Perl regular expressions to be matched against each part's:
|
#
|
# * Content-Type value (both declared and effective mime-type),
|
# including the possible security risk content types
|
# message/partial and message/external-body, as specified by rfc2046;
|
#
|
# * declared (i.e. recommended) file names as specified by MIME subfields
|
# Content-Disposition.filename and Content-Type.name, both in their
|
# raw (encoded) form and in rfc2047-decoded form if applicable;
|
#
|
# * file content type as guessed by 'file' utility, both the raw
|
# result from 'file', as well as short type name, classified
|
# into names such as .asc, .txt, .html, .doc, .jpg, .pdf,
|
# .zip, .exe, ... - see subroutine determine_file_types().
|
# This step is done only if $bypass_decode_parts is not true.
|
#
|
# * leave $banned_filename_re undefined to disable these checks
|
# (giving an empty list to new_RE() will also always return false)
|
|
$banned_filename_re = new_RE(
|
# qr'^UNDECIPHERABLE$', # is or contains any undecipherable components
|
qr'\.[^.]*\.(exe|vbs|pif|scr|bat|cmd|com|dll)$'i, # some double extensions
|
qr'[{}]', # curly braces in names (serve as Class ID extensions - CLSID)
|
# qr'.\.(exe|vbs|pif|scr|bat|cmd|com)$'i, # banned extension - basic
|
# qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
|
# jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
|
# vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
|
# qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
|
# qr'^\.(zip|lha|tnef|cab)$'i, # banned file(1) types
|
# qr'^\.exe$'i, # banned file(1) types
|
# qr'^application/x-msdownload$'i, # banned MIME types
|
# qr'^application/x-msdos-program$'i,
|
qr'^message/partial$'i, # rfc2046. this one is deadly for Outcrook
|
# qr'^message/external-body$'i, # block rfc2046
|
);
|
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
|
# and http://www.cknow.com/vtutor/vtextensions.htm
|
|
# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
|
# as well as any file name which happens to end with .exe. If only matching
|
# a file name is desired, but not the short name, a pattern qr'.\.exe$'i
|
# or similar may be used, which requires that at least one character precedes
|
# the '.exe', and so it will never match short file types, which always start
|
# with a dot.
|
|
|
#
|
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
|
#
|
|
# %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
|
# (these should be considered policy options, they do not disable checks,
|
# see bypass*checks for that!)
|
#
|
# Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
|
# envelope e-mail address (or domain only) to the hash %virus_lovers, or to
|
# the access list @virus_lovers_acl - see README.lookups and examples.
|
# Make sure the appropriate form (e.g. external/internal) of address
|
# is used in case of virtual domains, or when mapping external to internal
|
# addresses, etc. - this is MTA-specific.
|
#
|
# Notifications would still be generated however (see the overall
|
# picture above), and infected mail (if passed) gets additional header:
|
# X-AMaViS-Alert: INFECTED, message contains virus: ...
|
# (header not inserted with milter interface!)
|
#
|
# NOTE (milter interface only): in case of multiple recipients,
|
# it is only possible to drop or accept the message in its entirety - for all
|
# recipients. If all of them are virus lovers, we'll accept mail, but if
|
# at least one recipient is not a virus lover, we'll discard the message.
|
|
|
# %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
|
# lookup tables:
|
# (this is mainly a time-saving option, unlike virus_lovers* !)
|
#
|
# Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
|
# access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
|
# are used to skip entirely the decoding, unpacking and virus checking,
|
# but only if ALL recipients match the lookup.
|
#
|
# %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
|
# do NOT GUARANTEE the message will NOT be checked for viruses - this may
|
# still happen when there is more than one recipient for a message, and
|
# not all of them match these lookup tables. To guarantee virus delivery,
|
# a recipient must also match %virus_lovers/@virus_lovers_acl lookups
|
# (but see milter limitations above),
|
|
# NOTE: it would not be clever to base virus checks on SENDER address,
|
# since there are no guarantees that it is genuine. Many viruses
|
# and spam messages fake sender address. To achieve selective filtering
|
# based on the source of the mail (e.g. IP address, MTA port number, ...),
|
# use mechanisms provided by MTA if available.
|
|
|
# Similar to lookup tables controlling virus checking, there exist
|
# spam scanning, banned names/types, and headers_checks control counterparts:
|
# %spam_lovers, @spam_lovers_acl, $spam_lovers_re
|
# %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
|
# %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
|
# and:
|
# %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
|
# %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
|
# %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
|
# See README.lookups for details about the syntax.
|
|
# The following example disables spam checking altogether,
|
# since it matches any recipient e-mail address (any address
|
# is a subdomain of the top-level root DNS domain):
|
# @bypass_spam_checks_acl = qw( . );
|
|
# @bypass_header_checks_acl = qw( user@example.com );
|
# @bad_header_lovers_acl = qw( user@example.com );
|
|
|
# See README.lookups for further detail, and examples below.
|
|
# $virus_lovers{lc("postmaster\@$mydomain")} = 1;
|
# $virus_lovers{lc('postmaster@example.com')} = 1;
|
# $virus_lovers{lc('abuse@example.com')} = 1;
|
# $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
|
# $virus_lovers{lc('boss@example.com')} = 0; # never, even if domain matches
|
# $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
|
# $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
|
#or:
|
# @virus_lovers_acl = qw( me@lab.xxx.com !lab.xxx.com .xxx.com yyy.org );
|
#
|
# $bypass_virus_checks{lc('some.user2@butnot.example.com')} = 1;
|
# @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
|
|
# @virus_lovers_acl = qw( postmaster@example.com );
|
# $virus_lovers_re = new_RE( qr'^(helpdesk|postmaster)@example\.com$'i );
|
|
# $spam_lovers{lc("postmaster\@$mydomain")} = 1;
|
# $spam_lovers{lc('postmaster@example.com')} = 1;
|
# $spam_lovers{lc('abuse@example.com')} = 1;
|
# @spam_lovers_acl = qw( !.example.com );
|
# $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
|
|
|
# don't run spam check for these RECIPIENT domains:
|
# @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
|
# or the other way around (bypass check for all BUT these):
|
# @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
|
# a practical application: don't check outgoing mail for spam:
|
# @bypass_spam_checks_acl = ( "!.$mydomain", "." );
|
# (a downside of which is that such mail will not count as ham in SA bayes db)
|
|
|
# Where to find SQL server(s) and database to support SQL lookups?
|
# A list of triples: (dsn,user,passw). (dsn = data source name)
|
# More than one entry may be specified for multiple (backup) SQL servers.
|
# See 'man DBI', 'man DBD::mysql', 'man DBD::Pg', ... for details.
|
# When chroot-ed, accessing SQL server over inet socket may be more convenient.
|
#
|
# @lookup_sql_dsn =
|
# ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
|
# ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'] );
|
#
|
|
@lookup_sql_dsn = ( ['DBI:mysql:database=mailserver;host=127.0.0.1;port=3306', 'root', '']);
|
|
|
# ('mail' in the example is the database name, choose what you like)
|
# With PostgreSQL the dsn (first element of the triple) may look like:
|
# 'DBI:Pg:host=host1;dbname=mail'
|
|
# The SQL select clause to fetch per-recipient policy settings.
|
# The %k will be replaced by a comma-separated list of query addresses
|
# (e.g. full address, domain only, catchall). Use ORDER, if there
|
# is a chance that multiple records will match - the first match wins.
|
# If field names are not unique (e.g. 'id'), the later field overwrites the
|
# earlier in a hash returned by lookup, which is why we use '*,users.id'.
|
|
$sql_select_policy = 'SELECT *,users.id FROM users,policy'.
|
' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
|
' ORDER BY users.priority DESC';
|
|
# The SQL select clause to check sender in per-recipient whitelist/blacklist
|
# The first SELECT argument '?' will be users.id from recipient SQL lookup,
|
# the %k will be sender addresses (e.g. full address, domain only, catchall).
|
$sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
|
' WHERE (wblist.rid=?) AND (wblist.sid=mailaddr.id)'.
|
' AND (mailaddr.email IN (%k))'.
|
' ORDER BY mailaddr.priority DESC';
|
|
# $sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
|
|
|
# If you decide to pass viruses (or spam) to certain recipients using the
|
# above lookup tables or using $final_virus_destiny=D_PASS, you can set
|
# the variable $addr_extension_virus ($addr_extension_spam) to some
|
# string, and the recipient address will have this string appended
|
# as an address extension to the local-part of the address. This extension
|
# can be used by final local delivery agent to place such mail in different
|
# folders. Leave these two variables undefined or empty strings to prevent
|
# appending address extensions. Setting has no effect on recipient which will
|
# not be receiving viruses/spam. Recipients who do not match lookup tables
|
# local_domains* are not affected.
|
#
|
# LDAs usually default to stripping away address extension if no special
|
# handling is specified, so having this option enabled normally does no harm,
|
# provided the $recipients_delimiter matches the setting on the final
|
# MTA's LDA.
|
|
# $addr_extension_virus = 'virus'; # (default is undef, same as empty)
|
# $addr_extension_spam = 'spam'; # (default is undef, same as empty)
|
# $addr_extension_banned = 'banned'; # (default is undef, same as empty)
|
|
|
# Delimiter between local part of the recipient address and address extension
|
# (which can optionally be added, see variables $addr_extension_virus and
|
# $addr_extension_spam). E.g. recipient address <user@example.com> gets changed
|
# to <user+virus@example.com>.
|
#
|
# Delimiter should match equivalent (final) MTA delimiter setting.
|
# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
|
# Setting it to an empty string or to undef disables this feature
|
# regardless of $addr_extension_virus and $addr_extension_spam settings.
|
|
$recipient_delimiter = '+'; # (default is '+')
|
|
# true: replace extension; false: append extension
|
$replace_existing_extension = 1; # (default is false)
|
|
# Affects matching of localpart of e-mail addresses (left of '@')
|
# in lookups: true = case sensitive, false = case insensitive
|
$localpart_is_case_sensitive = 0; # (default is false)
|
|
|
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
|
# (affects spam checking only, has no effect on virus and other checks)
|
|
# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
|
# senders even if the message would be recognized as spam. Effectively, for
|
# the specified senders, message recipients temporarily become 'spam_lovers'.
|
# To avoid surprises, whitelisted sender also suppresses inserting/editing
|
# the tag2-level header fields (X-Spam-*, Subject), appending spam address
|
# extension, and quarantining.
|
|
# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
|
# Effectively, for messages from blacklisted senders, spam level
|
# is artificially pushed high, and the normal spam processing applies,
|
# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
|
# reactions to spam, including possible rejection. If the message nevertheless
|
# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
|
# in the 'X-Spam-Status' header field, but the reported spam value and
|
# set of tests in this report header field (if available from SpamAssassin,
|
# which may have not been called) is not adjusted.
|
#
|
# A sender may be both white- and blacklisted at the same time, settings
|
# are independent. For example, being both white- and blacklisted, message
|
# is delivered to recipients, but is not tagged as spam (X-Spam-Flag: No;
|
# X-Spam-Status: No, ...), but the reported spam level (if computed) may
|
# still indicate high spam score.
|
#
|
# If ALL recipients of the message either white- or blacklist the sender,
|
# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
|
#
|
# The following variables (lookup tables) are available, with the semantics
|
# and syntax as specified in README.lookups:
|
#
|
# %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
|
# %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
|
|
# SOME EXAMPLES:
|
#
|
#ACL:
|
# @whitelist_sender_acl = qw( .example.com );
|
#
|
# @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
|
# NOTE: This is not a reliable way of turning off spam checks for
|
# locally-originating mail, as sender address can easily be faked.
|
# To reliably avoid spam-scanning outgoing mail,
|
# use @bypass_spam_checks_acl .
|
|
#RE:
|
# $whitelist_sender_re = new_RE(
|
# qr'^postmaster@.*\bexample\.com$'i,
|
# qr'owner-[^@]*@'i, qr'-request@'i,
|
# qr'\.example\.com$'i );
|
#
|
$blacklist_sender_re = new_RE(
|
qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
|
qr'^(investments|lose_weight_today|market\.alert|money2you|MyGreenCard)@'i,
|
qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonl|smoking2002k)@'i,
|
qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
|
qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
|
qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
|
);
|
|
#HASH lookup variant:
|
# NOTE: Perl operator qw splits its argument string by whitespace
|
# and produces a list. This means that addresses can not contain
|
# whitespace, and there is no provision for comments within the string.
|
# You can use the normal Perl list syntax if you have special requirements,
|
# e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
|
# addresses from a file.
|
#
|
|
# a hash lookup table can be read from a file,
|
# one address per line, comments and empty lines are permitted:
|
#
|
# read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
|
|
# ... or set directly:
|
map { $whitelist_sender{lc($_)}=1 } (qw(
|
nobody@cert.org
|
owner-alert@iss.net
|
slashdot@slashdot.org
|
bugtraq@securityfocus.com
|
NTBUGTRAQ@LISTSERV.NTBUGTRAQ.COM
|
security-alerts@linuxsecurity.com
|
amavis-user-admin@lists.sourceforge.net
|
razor-users-admin@lists.sourceforge.net
|
notification-return@lists.sophos.com
|
mailman-announce-admin@python.org
|
zope-announce-admin@zope.org
|
owner-postfix-users@postfix.org
|
owner-postfix-announce@postfix.org
|
owner-sendmail-announce@lists.sendmail.org
|
sendmail-announce-request@lists.sendmail.org
|
ca+envelope@sendmail.org
|
owner-technews@postel.ACM.ORG
|
lvs-users-admin@LinuxVirtualServer.org
|
ietf-123-owner@loki.ietf.org
|
cvs-commits-list-admin@gnome.org
|
rt-users-admin@lists.fsck.com
|
owner-announce@mnogosearch.org
|
owner-hackers@ntp.org
|
owner-bugs@ntp.org
|
clp-request@comp.nus.edu.sg
|
surveys-errors@lists.nua.ie
|
emailNews@genomeweb.com
|
owner-textbreakingnews@CNNIMAIL12.CNN.COM
|
yahoo-dev-null@yahoo-inc.com
|
));
|
|
|
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
|
|
# The same semantics as for global white/blacklisting applies, but this
|
# time each recipient (or its domain, or subdomain, ...) can be given
|
# an individual lookup table for matching senders. The per-recipient lookups
|
# override the global lookups, which serve as a fallback default.
|
|
# Specify a two-level lookup table: the key for the outer table is recipient,
|
# and the result should be an inner lookup table (hash or ACL or RE),
|
# where the key used will be the sender.
|
#
|
#$per_recip_blacklist_sender_lookup_tables = {
|
# 'user1@my.example.com'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
|
# 'user2@my.example.com'=>[qw( spammer@d1.example,org .d2.example,org )],
|
#};
|
#$per_recip_whitelist_sender_lookup_tables = {
|
# 'user@my.example.com' => [qw( friend@example.org .other.example.org )],
|
# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
|
# '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
|
# 'abuse@' => { 'postmaster@'=>1,
|
# 'cert-advisory-owner@cert.org'=>1, 'owner-alert@iss.net'=>1 },
|
#};
|
|
|
#
|
# Section VI - Resource limits
|
#
|
|
# Sanity limit to the number of allowed recipients per SMTP transaction
|
# $smtpd_recipient_limit = 1000; # (default is 1000)
|
|
|
# Resource limits to protect unpackers, decompressors and virus scanners
|
# against mail bombs (e.g. 42.zip)
|
|
# Maximum recursion level for extraction/decoding (0 or undef disables limit)
|
$MAXLEVELS = 14; # (default is undef, no limit)
|
|
# Maximum number of extracted files (0 or undef disables the limit)
|
$MAXFILES = 1500; # (default is undef, no limit)
|
|
# For the cumulative total of all decoded mail parts we set max storage size
|
# to defend against mail bombs. Even though parts may be deleted (replaced
|
# by decoded text) during decoding, the size they occupied is _not_ returned
|
# to the quota pool.
|
#
|
# Parameters to storage quota formula for unpacking/decoding/decompressing
|
# Formula:
|
# quota = max($MIN_EXPANSION_QUOTA,
|
# $mail_size*$MIN_EXPANSION_FACTOR,
|
# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
|
# In plain words (later condition overrules previous ones):
|
# allow MAX_EXPANSION_FACTOR times initial mail size,
|
# but not more than MAX_EXPANSION_QUOTA,
|
# but not less than MIN_EXPANSION_FACTOR times initial mail size,
|
# but never less than MIN_EXPANSION_QUOTA
|
#
|
$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
|
$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
|
$MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
|
$MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
|
|
|
#
|
# Section VII - External programs, virus scanners
|
#
|
|
# Specify a path string, which is a colon-separated string of directories
|
# (no trailing slashes!) to be assigned to the environment variable PATH
|
# and to serve for locating external programs below.
|
|
# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
|
# relative to the chroot directory specified;
|
|
$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
|
|
# Specify one string or a search list of strings (first match wins).
|
# The string (or: each string in a list) may be an absolute path,
|
# or just a program name, to be located via $path;
|
# Empty string or undef (=default) disables the use of that external program.
|
# Optionally command arguments may be specified - only the first substring
|
# up to the whitespace is used for file searching.
|
|
$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
|
|
$gzip = 'gzip';
|
$bzip2 = 'bzip2';
|
$lzop = 'lzop';
|
$uncompress = ['uncompress', 'gzip -d', 'zcat'];
|
$unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
|
$arc = ['nomarch', 'arc'];
|
$unarj = ['arj', 'unarj']; # both can extract, arj is recommended
|
$unrar = ['rar', 'unrar']; # both can extract, same options
|
$zoo = 'zoo';
|
$lha = 'lha';
|
$cpio = 'cpio'; # comment out if cpio does not support GNU options
|
|
|
# SpamAssassin settings
|
|
# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
|
# of the option local_tests_only. See Mail::SpamAssassin man page.
|
# If set to 1, SA tests are restricted to local tests only, i.e. no tests
|
# that require internet access will be performed.
|
#
|
$sa_local_tests_only = 1; # (default: false)
|
#$sa_auto_whitelist = 1; # turn on AWL (default: false)
|
|
# Timout for SpamAssassin. This is only used if spamassassin does NOT
|
# override it (which it often does if sa_local_tests_only is not true)
|
$sa_timeout = 30; # timeout in seconds for a call to SpamAssassin
|
# (default is 30 seconds, undef disables it)
|
|
# AWL (auto whitelisting), requires spamassassin 2.44 or better
|
# $sa_auto_whitelist = 1; # defaults to undef
|
|
$sa_mail_body_size_limit = 150*1024; # don't waste time on SA is mail is larger
|
# (less than 1% of spam is > 64k)
|
# default: undef, no limitations
|
|
# default values, can be overridden by more specific lookups, e.g. SQL
|
$sa_tag_level_deflt = 4.0; # add spam info headers if at, or above that level
|
$sa_tag2_level_deflt = 6.3; # add 'spam detected' headers at that level
|
$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
|
# at or above that level: bounce/reject/drop,
|
# quarantine, and adding mail address extension
|
|
$sa_dsn_cutoff_level = 10; # spam level beyond which a DSN is not sent,
|
# effectively turning D_BOUNCE into D_DISCARD;
|
# undef disables this feature and is a default;
|
|
#
|
# The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
|
# may also be hashrefs to hash lookup tables, to make static per-recipient
|
# settings possible without having to resort to SQL or LDAP lookups.
|
|
# a quick reference:
|
# tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
|
# tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
|
# kill_level controls 'evasive actions' (reject, quarantine, extensions);
|
# it only makes sense to maintain the relationship:
|
# tag_level <= tag2_level <= kill_level < $sa_dsn_cutoff_level
|
|
# string to prepend to Subject header field when message exceeds tag2 level
|
$sa_spam_subject_tag = '***SPAM*** '; # (defaults to undef, disabled)
|
# (only seen when spam is not to be rejected
|
# and recipient is in local_domains*)
|
|
#$sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
|
# Example: modify Subject for all local recipients except user@example.com
|
#$sa_spam_modifies_subj = [qw( !user@example.com . )];
|
|
# stop anti-virus scanning when the first scanner detects a virus?
|
$first_infected_stops_scan = 1; # default is false, all scanners are called
|
|
# @av_scanners is a list of n-tuples, where fields semantics is:
|
# 1. av scanner plain name, to be used in log and reports;
|
# 2. scanner program name; this string will be submitted to subroutine
|
# find_external_programs(), which will try to find the full program
|
# path name; if program is not found, this scanner is disabled.
|
# Besides a simple string (full program path name or just the basename
|
# to be looked for in PATH), this may be an array ref of alternative
|
# program names or full paths - the first match in the list will be used;
|
# As a special case for more complex scanners, this field may be
|
# a subroutine reference, and the whole n-tuple is passed to it as args.
|
# 3. command arguments to be given to the scanner program;
|
# a substring {} will be replaced by the directory name to be scanned,
|
# i.e. "$tempdir/parts", a "*" will be replaced by file names of parts;
|
# 4. an array ref of av scanner exit status values, or a regexp (to be
|
# matched against scanner output), indicating NO VIRUSES found;
|
# 5. an array ref of av scanner exit status values, or a regexp (to be
|
# matched against scanner output), indicating VIRUSES WERE FOUND;
|
# Note: the virus match prevails over a 'not found' match, so it is safe
|
# even if the no. 4. matches for viruses too;
|
# 6. a regexp (to be matched against scanner output), returning a list
|
# of virus names found.
|
# 7. and 8.: (optional) subroutines to be executed before and after scanner
|
# (e.g. to set environment or current directory);
|
# see examples for these at KasperskyLab AVP and Sophos sweep.
|
|
# NOTES:
|
#
|
# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
|
# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
|
# (which can be handy if all you want to do is spam scanning);
|
#
|
# - the order matters: although _all_ available entries from the list are
|
# always tried regardless of their verdict, scanners are run in the order
|
# specified: the report from the first one detecting a virus will be used
|
# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
|
#
|
# - it doesn't hurt to keep an unused command line scanner entry in the list
|
# if the program can not be found; the path search is only performed once
|
# during the program startup;
|
#
|
# COROLLARY: to disable a scanner that _does_ exist on your system,
|
# comment out its entry or use undef or '' as its program name/path
|
# (second parameter). An example where this is almost a must: disable
|
# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
|
# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
|
# program happens to have a name matching one of the entries ('sweep'
|
# again comes to mind);
|
#
|
# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
|
# for interfacing (where the second parameter starts with \&).
|
# Keeping such entry and not having a corresponding virus scanner daemon
|
# causes an unnecessary connection attempt (which eventually times out,
|
# but it wastes precious time). For this reason the daemonized entries
|
# are commented in the distribution - just remove the '#' where needed.
|
#
|
# CERT list of av resources: http://www.cert.org/other_sources/viruses.html
|
|
@av_scanners = (
|
|
# ### http://www.vanja.com/tools/sophie/
|
# ['Sophie',
|
# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
|
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
|
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
|
|
# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
|
# ['Sophos SAVI', \&sophos_savi ],
|
|
### http://www.clamav.net/
|
['Clam Antivirus-clamd',
|
\&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.ctl"],
|
qr/\bOK$/, qr/\bFOUND$/,
|
qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
|
# NOTE: run clamd under the same user as amavisd; match the socket
|
# name (LocalSocket) in clamav.conf to the socket name in this entry
|
# When running chrooted one may prefer: ["CONTSCAN {}\n","$MYHOME/clamd"],
|
|
# ### http://www.openantivirus.org/
|
# ['OpenAntiVirus ScannerDaemon (OAV)',
|
# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
|
# qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
|
|
# ### http://www.vanja.com/tools/trophie/
|
# ['Trophie',
|
# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
|
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
|
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
|
|
# ### http://www.grisoft.com/
|
# ['AVG Anti-Virus',
|
# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:55555'],
|
# qr/^200/, qr/^403/, qr/^403 .*?: (.+)/ ],
|
|
# ### http://www.f-prot.com/
|
# ['FRISK F-Prot Daemon',
|
# \&ask_daemon,
|
# ["GET {}/*?-dumb%20-archive%20-packed HTTP/1.0\r\n\r\n",
|
# ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
|
# '127.0.0.1:10203','127.0.0.1:10204'] ],
|
# qr/(?i)<summary[^>]*>clean<\/summary>/,
|
# qr/(?i)<summary[^>]*>infected<\/summary>/,
|
# qr/(?i)<name>(.+)<\/name>/ ],
|
|
['KasperskyLab AVP - aveclient',
|
['/usr/local/kav/bin/aveclient','/usr/local/share/kav/bin/aveclient',
|
'/opt/kav/bin/aveclient','aveclient'],
|
'-p /var/run/aveserver -s {}/*', [0,3,6,8], qr/\b(INFECTED|SUSPICION)\b/,
|
qr/(?:INFECTED|SUSPICION) (.+)/,
|
],
|
|
['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp'],
|
'-* -P -B -Y -O- {}', [0,8,16,24], [2,3,4,5,6, 18,19,20,21,22],
|
qr/infected: (.+)/,
|
sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
|
sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
|
],
|
|
### The kavdaemon and AVPDaemonClient have been removed from Kasperky
|
### products and replaced by aveserver and aveclient
|
['KasperskyLab AVPDaemonClient',
|
[ '/opt/AVP/kavdaemon', 'kavdaemon',
|
'/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
|
'/opt/AVP/AvpTeamDream', 'AvpTeamDream',
|
'/opt/AVP/avpdc', 'avpdc' ],
|
"-f=$TEMPBASE {}", [0,8,16,24], [2,3,4,5,6, 18,19,20,21,22],
|
qr/infected: ([^\r\n]+)/ ],
|
# change the startup-script in /etc/init.d/kavd to:
|
# DPARMS="-* -Y -dl -f=/var/amavis /var/amavis"
|
# (or perhaps: DPARMS="-I0 -Y -* /var/amavis" )
|
# adjusting /var/amavis above to match your $TEMPBASE.
|
# The '-f=/var/amavis' is needed if not running it as root, so it
|
# can find, read, and write its pid file, etc., see 'man kavdaemon'.
|
# defUnix.prf: there must be an entry "*/var/amavis" (or whatever
|
# directory $TEMPBASE specifies) in the 'Names=' section.
|
# cd /opt/AVP/DaemonClients; configure; cd Sample; make
|
# cp AvpDaemonClient /opt/AVP/
|
# su - vscan -c "${PREFIX}/kavdaemon ${DPARMS}"
|
|
### http://www.hbedv.com/ or http://www.centralcommand.com/
|
['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
|
['antivir','vexira'],
|
'--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
|
qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
|
(?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
|
# NOTE: if you only have a demo version, remove -z and add 214, as in:
|
# '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,
|
|
### http://www.commandsoftware.com/
|
['Command AntiVirus for Linux', 'csav',
|
'-all -archive -packed {}', [50], [51,52,53],
|
qr/Infection: (.+)/ ],
|
|
### http://www.symantec.com/
|
['Symantec CarrierScan via Symantec CommandLineScanner',
|
'cscmdline', '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
|
qr/^Files Infected:\s+0$/, qr/^Infected\b/,
|
qr/^(?:Info|Virus Name):\s+(.+)/ ],
|
|
### http://www.symantec.com/
|
['Symantec AntiVirus Scan Engine',
|
'savsecls', '-server 127.0.0.1:7777 -mode scanrepair -details -verbose {}',
|
[0], qr/^Infected\b/,
|
qr/^(?:Info|Virus Name):\s+(.+)/ ],
|
# NOTE: check options and patterns to see which entry better applies
|
|
### http://www.sald.com/, http://drweb.imshop.de/
|
['drweb - DrWeb Antivirus',
|
['/usr/local/drweb/drweb', '/opt/drweb/drweb', 'drweb'],
|
'-path={} -al -go -ot -cn -upn -ok-',
|
[0,32], [1,33], qr' infected (?:with|by)(?: virus)? (.*)$'],
|
|
# ### http://www.sald.com/, http://www.dials.ru/english/, http://www.drweb.ru/
|
# ['DrWebD', \&ask_daemon, # DrWebD 4.31 or later
|
# [pack('N',1). # DRWEBD_SCAN_CMD
|
# pack('N',0x00280001). # DONT_CHANGEMAIL, IS_MAIL, RETURN_VIRUSES
|
# pack('N', # path length
|
# length("$TEMPBASE/amavis-yyyymmddTHHMMSS-xxxxx/parts/part-xxxxx")).
|
# '{}/*'. # path
|
# pack('N',0). # content size
|
# pack('N',0),
|
# '/var/drweb/run/drwebd.sock',
|
# # '/var/amavis/var/run/drwebd.sock', # suitable for chroot
|
# # '/usr/local/drweb/run/drwebd.sock', # FreeBSD drweb ports default
|
# # '127.0.0.1:3000', # or over an inet socket
|
# ],
|
# qr/\A\x00(\x10|\x11)\x00\x00/s, # IS_CLEAN, EVAL_KEY
|
# qr/\A\x00(\x00|\x01)\x00(\x20|\x40|\x80)/s, # KNOWN_V, UNKNOWN_V, V._MODIF
|
# qr/\A.{12}(?:infected with )?([^\x00]+)\x00/s,
|
# ],
|
# # NOTE: If you are using amavis-milter, change length to:
|
# # length("$TEMPBASE/amavis-milter-xxxxxxxxxxxxxx/parts/part-xxxxx").
|
|
### http://www.f-secure.com/products/anti-virus/
|
['F-Secure Antivirus', 'fsav',
|
'--dumb --mime --archive {}', [0], [3,8],
|
qr/(?:infection|Infected|Suspected): (.+)/ ],
|
|
['CAI InoculateIT', 'inocucmd',
|
'-sec -nex {}', [0], [100],
|
qr/was infected by virus (.+)/ ],
|
|
['MkS_Vir for Linux (beta)', ['mks32','mks'],
|
'-s {}/*', [0], [1,2], # any use for options: -a -c ?
|
qr/--[ \t]*(.+)/ ],
|
|
### http://www.nod32.com/
|
['ESET Software NOD32', 'nod32',
|
'-all -subdir+ {}', [0], [1,2],
|
qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
|
|
### http://www.nod32.com/
|
['ESET Software NOD32 - Client/Server Version', 'nod32cli',
|
'-a -r -d recurse --heur standard {}', [0], [10,11],
|
qr/^\S+\s+infected:\s+(.+)/ ],
|
|
### http://www.norman.com/products_nvc.shtml
|
['Norman Virus Control v5 / Linux', 'nvcc',
|
'-c -l:0 -s -u {}', [0], [1],
|
qr/(?i).* virus in .* -> \'(.+)\'/ ],
|
|
### http://www.pandasoftware.com/
|
['Panda Antivirus for Linux', ['pavcl'],
|
'-aut -aex -heu -cmp -nbr -nor -nso -eng {}',
|
qr/Number of files infected[ .]*: 0(?!\d)/,
|
qr/Number of files infected[ .]*: 0*[1-9]/,
|
qr/Found virus :\s*(\S+)/ ],
|
|
# GeCAD AV technology is acquired by Microsoft; RAV has been discontinued.
|
# Check your RAV license terms before fiddling with the following two lines!
|
# ['GeCAD RAV AntiVirus 8', 'ravav',
|
# '--all --archive --mail {}', [1], [2,3,4,5], qr/Infected: (.+)/ ],
|
# # NOTE: the command line switches changed with scan engine 8.5 !
|
# # (btw, assigning stdin to /dev/null causes RAV to fail)
|
|
### http://www.nai.com/
|
['NAI McAfee AntiVirus (uvscan)', 'uvscan',
|
'--secure -rv --mime --summary --noboot - {}', [0], [13],
|
qr/(?x) Found (?:
|
\ the\ (.+)\ (?:virus|trojan) |
|
\ (?:virus|trojan)\ or\ variant\ ([^ ]+) |
|
:\ (.+)\ NOT\ a\ virus)/,
|
# sub {$ENV{LD_PRELOAD}='/lib/libc.so.6'},
|
# sub {delete $ENV{LD_PRELOAD}},
|
],
|
# NOTE1: with RH9: force the dynamic linker to look at /lib/libc.so.6 before
|
# anything else by setting environment variable LD_PRELOAD=/lib/libc.so.6
|
# and then clear it when finished to avoid confusing anything else.
|
# NOTE2: to treat encrypted files as viruses replace the [13] with:
|
# qr/^\s{5,}(Found|is password-protected|.*(virus|trojan))/
|
|
### http://www.virusbuster.hu/en/
|
['VirusBuster', ['vbuster', 'vbengcl'],
|
# VirusBuster Ltd. does not support the daemon version for the workstation
|
# engine (vbuster-eng-1.12-linux-i386-libc6.tgz) any longer. The names of
|
# binaries, some parameters AND return codes (from 3 to 1) changed.
|
"{} -ss -i '*' -log=$MYHOME/vbuster.log", [0], [1],
|
qr/: '(.*)' - Virus/ ],
|
|
# ### http://www.virusbuster.hu/en/
|
# ['VirusBuster (Client + Daemon)', 'vbengd',
|
# # HINT: for an infected file it returns always 3,
|
# # although the man-page tells a different story
|
# '-f -log scandir {}', [0], [3],
|
# qr/Virus found = (.*);/ ],
|
|
### http://www.cyber.com/
|
['CyberSoft VFind', 'vfind',
|
'--vexit {}/*', [0], [23], qr/##==>>>> VIRUS ID: CVDL (.+)/,
|
# sub {$ENV{VSTK_HOME}='/usr/lib/vstk'},
|
],
|
|
### http://www.ikarus-software.com/
|
['Ikarus AntiVirus for Linux', 'ikarus',
|
'{}', [0], [40], qr/Signature (.+) found/ ],
|
|
### http://www.bitdefender.com/
|
['BitDefender', 'bdc',
|
'--all --arc --mail {}', qr/^Infected files *:0(?!\d)/,
|
qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/,
|
qr/(?:suspected|infected): (.*)(?:\033|$)/ ],
|
);
|
|
# If no virus scanners from the @av_scanners list produce 'clean' nor
|
# 'infected' status (e.g. they all fail to run or the list is empty),
|
# then _all_ scanners from the @av_scanners_backup list are tried.
|
# When there are both daemonized and command-line scanners available,
|
# it is customary to place slower command-line scanners in the
|
# @av_scanners_backup list. The default choice is somewhat arbitrary,
|
# move entries from one list to another as desired.
|
|
@av_scanners_backup = (
|
|
### http://www.clamav.net/
|
['Clam Antivirus - clamscan', 'clamscan',
|
"--stdout --no-summary -r --tempdir=$TEMPBASE {}", [0], [1],
|
qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
|
|
### http://www.f-prot.com/
|
['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
|
'-dumb -archive -packed {}', [0,8], [3,6],
|
qr/Infection: (.+)/ ],
|
|
### http://www.trendmicro.com/
|
['Trend Micro FileScanner', ['/etc/iscan/vscan','vscan'],
|
'-za -a {}', [0], qr/Found virus/, qr/Found virus (.+) in/ ],
|
|
['KasperskyLab kavscanner', ['/opt/kav/bin/kavscanner','kavscanner'],
|
'-i1 -xp {}', [0,10,15], [5,20,21,25],
|
qr/(?:CURED|INFECTED|CUREFAILED|WARNING|SUSPICION) (.*)/ ,
|
sub {chdir('/opt/kav/bin') or die "Can't chdir to kav: $!"},
|
sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
|
],
|
|
# Commented out because the name 'sweep' clashes with the Debian package of
|
# the same name. Make sure the correct sweep is found in the path when enabling
|
#
|
# ### http://www.sophos.com/
|
# ['Sophos Anti Virus (sweep)', 'sweep',
|
# '-nb -f -all -rec -ss -sc -archive -cab -tnef --no-reset-atime {}',
|
# [0,2], qr/Virus .*? found/,
|
# qr/^>>> Virus(?: fragment)? '?(.*?)'? found/,
|
# ],
|
# # other options to consider: -mime -oe -idedir=/usr/local/sav
|
|
# always succeeds (uncomment to consider mail clean if all other scanners fail)
|
# ['always-clean', sub {0}],
|
|
);
|
|
|
#
|
# Section VIII - Debugging
|
#
|
|
# The most useful debugging tool is to run amavisd-new non-detached
|
# from a terminal window:
|
# amavisd debug
|
|
# Some more refined approaches:
|
|
# If sender matches ACL, turn log level fully up, just for this one message,
|
# and preserve temporary directory
|
#@debug_sender_acl = ( "test-sender\@$mydomain" );
|
#@debug_sender_acl = qw( debug@example.com );
|
|
# May be useful along with @debug_sender_acl:
|
# Prevent all decoded originals being deleted (replaced by decoded part)
|
#$keep_decoded_original_re = new_RE( qr/.*/ );
|
|
# Turn on SpamAssassin debugging (output to STDERR, use with 'amavisd debug')
|
#$sa_debug = 1; # defaults to false
|
|
#-------------
|
1; # insure a defined return
|
