vogelor
2011-03-26 dead5ccaf44e679d4eb938e12673ea1217f23675
The "old" monitoring-module and the "new" rescue-module needed some function twice. So i created a tool-object containing these functions
2 files modified
2 files added
5459 ■■■■ changed files
install/lib/install.lib.php 2 ●●● patch | view | raw | blame | history
server/lib/classes/monitor_tools.inc.php 1562 ●●●●● patch | view | raw | blame | history
server/mods-available/monitor_core_module.inc.php 1973 ●●●● patch | view | raw | blame | history
server/mods-available/rescue_core_module.inc.php 1922 ●●●●● patch | view | raw | blame | history
install/lib/install.lib.php
@@ -57,7 +57,7 @@
//** Get distribution identifier
//** IMPORTANT!
//   This is the same code as in server/mods-available/monitor_core_module.inc.php
//   This is the same code as in server/lib/classes/monitor_tools.inc.php
//   So if you change it here, you also have to change it in there!
function get_distname() {
    
server/lib/classes/monitor_tools.inc.php
New file
@@ -0,0 +1,1562 @@
<?php
/*
  Copyright (c) 2007-2011, Till Brehm, projektfarm Gmbh and Oliver Vogel www.muv.com
  All rights reserved.
  Redistribution and use in source and binary forms, with or without modification,
  are permitted provided that the following conditions are met:
 * Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation
  and/or other materials provided with the distribution.
 * Neither the name of ISPConfig nor the names of its contributors
  may be used to endorse or promote products derived from this software without
  specific prior written permission.
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
class monitor_tools {
    //** Get distribution identifier
    //** IMPORTANT!
    //   This is the same code as in install/lib/install.lib.php
    //   So if you change it here, you also have to change it in there!
    //   Please do not forget to remove the swriteln(); - lines here at this file
    public function get_distname() {
        $distname = '';
        $distver = '';
        $distid = '';
        $distbaseid = '';
        //** Debian or Ubuntu
        if (file_exists('/etc/debian_version')) {
            if (trim(file_get_contents('/etc/debian_version')) == '4.0') {
                $distname = 'Debian';
                $distver = '4.0';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif (strstr(trim(file_get_contents('/etc/debian_version')), '5.0')) {
                $distname = 'Debian';
                $distver = 'Lenny';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif (strstr(trim(file_get_contents('/etc/debian_version')), '6.0') || trim(file_get_contents('/etc/debian_version')) == 'squeeze/sid') {
                $distname = 'Debian';
                $distver = 'Squeeze/Sid';
                $distid = 'debian60';
                $distbaseid = 'debian';
            } else {
                $distname = 'Debian';
                $distver = 'Unknown';
                $distid = 'debian40';
                $distbaseid = 'debian';
            }
        }
        //** OpenSuSE
        elseif (file_exists('/etc/SuSE-release')) {
            if (stristr(file_get_contents('/etc/SuSE-release'), '11.0')) {
                $distname = 'openSUSE';
                $distver = '11.0';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif (stristr(file_get_contents('/etc/SuSE-release'), '11.1')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif (stristr(file_get_contents('/etc/SuSE-release'), '11.2')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } else {
                $distname = 'openSUSE';
                $distver = 'Unknown';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            }
        }
        //** Redhat
        elseif (file_exists('/etc/redhat-release')) {
            $content = file_get_contents('/etc/redhat-release');
            if (stristr($content, 'Fedora release 9 (Sulphur)')) {
                $distname = 'Fedora';
                $distver = '9';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'Fedora release 10 (Cambridge)')) {
                $distname = 'Fedora';
                $distver = '10';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'Fedora release 10')) {
                $distname = 'Fedora';
                $distver = '11';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'CentOS release 5.2 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.2';
                $distid = 'centos52';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'CentOS release 5.3 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.3';
                $distid = 'centos53';
                $distbaseid = 'fedora';
            } else {
                $distname = 'Redhat';
                $distver = 'Unknown';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            }
        }
        //** Gentoo
        elseif (file_exists('/etc/gentoo-release')) {
            $content = file_get_contents('/etc/gentoo-release');
            preg_match_all('/([0-9]{1,2})/', $content, $version);
            $distname = 'Gentoo';
            $distver = $version[0][0] . $version[0][1];
            $distid = 'gentoo';
            $distbaseid = 'gentoo';
        } else {
            die('Unrecognized GNU/Linux distribution');
        }
        return array('name' => $distname, 'version' => $distver, 'id' => $distid, 'baseid' => $distbaseid);
    }
    public function monitorHDQuota() {
        global $conf;
        /* Initialize data array */
        $data = array();
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'harddisk_quota';
        /** The state of the harddisk_quota. */
        $state = 'ok';
        /** Fetch the data for all users */
        $dfData = shell_exec('repquota -au');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first 5 lines, process the rest
         */
        for ($i = 5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $username = $s[0];
                if (substr($username, 0, 3) == 'web') {
                    if (isset($data['user'][$username])) {
                        $data['user'][$username]['used'] += $s[2];
                        $data['user'][$username]['soft'] += $s[3];
                        $data['user'][$username]['hard'] += $s[4];
                    } else {
                        $data['user'][$username]['used'] = $s[2];
                        $data['user'][$username]['soft'] = $s[3];
                        $data['user'][$username]['hard'] = $s[4];
                    }
                }
            }
        }
        /** Fetch the data for all users */
        $dfData = shell_exec('repquota -ag');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first 5 lines, process the rest
         */
        for ($i = 5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $groupname = $s[0];
                if (substr($groupname, 0, 6) == 'client') {
                    if (isset($data['group'][$groupname])) {
                        $data['group'][$groupname]['used'] += $s[1];
                        $data['group'][$groupname]['soft'] += $s[2];
                        $data['group'][$groupname]['hard'] += $s[3];
                    } else {
                        $data['group'][$groupname]['used'] = $s[1];
                        $data['group'][$groupname]['soft'] = $s[2];
                        $data['group'][$groupname]['hard'] = $s[3];
                    }
                }
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorServer() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'server_load';
        /*
          Fetch the data into a array
         */
        $procUptime = shell_exec("cat /proc/uptime | cut -f1 -d' '");
        $data['up_days'] = floor($procUptime / 86400);
        $data['up_hours'] = floor(($procUptime - $data['up_days'] * 86400) / 3600);
        $data['up_minutes'] = floor(($procUptime - $data['up_days'] * 86400 - $data['up_hours'] * 3600) / 60);
        $data['uptime'] = shell_exec('uptime');
        $tmp = explode(',', $data['uptime'], 4);
        $tmpUser = explode(' ', trim($tmp[2]));
        $data['user_online'] = intval($tmpUser[0]);
        //* New Load Average code to fix "always zero" bug in non-english distros. NEEDS TESTING
        $loadTmp = shell_exec("cat /proc/loadavg | cut -f1-3 -d' '");
        $load = explode(' ', $loadTmp);
        $data['load_1'] = floatval(str_replace(',', '.', $load[0]));
        $data['load_5'] = floatval(str_replace(',', '.', $load[1]));
        $data['load_15'] = floatval(str_replace(',', '.', $load[2]));
        /** The state of the server-load. */
        $state = 'ok';
        if ($data['load_1'] > 20)
            $state = 'info';
        if ($data['load_1'] > 50)
            $state = 'warning';
        if ($data['load_1'] > 100)
            $state = 'critical';
        if ($data['load_1'] > 150)
            $state = 'error';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorOsVer() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'os_info';
        /*
          Fetch the data into a array
         */
        $dist = $this->get_distname();
        $data['name'] = $dist['name'];
        $data['version'] = $dist['version'];
        /* the OS has no state. It is, what it is */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorIspcVer() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'ispc_info';
        /*
          Fetch the data into a array
         */
        $data['name'] = ISPC_APP_TITLE;
        $data['version'] = ISPC_APP_VERSION;
        /* the ISPC-Version has no state. It is, what it is */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorDiskUsage() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'disk_usage';
        /** The state of the disk-usage */
        $state = 'ok';
        /** Fetch the data of ALL devices into a array (needed for monitoring!) */
        $dfData = shell_exec('df -hT');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first line, process the rest
         */
        for ($i = 1; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make an array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $data[$i]['fs'] = $s[0];
                $data[$i]['type'] = $s[1];
                $data[$i]['size'] = $s[2];
                $data[$i]['used'] = $s[3];
                $data[$i]['available'] = $s[4];
                $data[$i]['percent'] = $s[5];
                $data[$i]['mounted'] = $s[6];
                /*
                 * calculate the state
                 */
                $usePercent = floatval($data[$i]['percent']);
                //* We don't want to check some filesystem which have no sensible filling levels
                switch ($data[$i]['type']) {
                    case 'iso9660':
                    case 'cramfs':
                    case 'udf':
                    case 'tmpfs':
                    case 'devtmpfs':
                    case 'udev':
                        break;
                    default:
                        if ($usePercent > 75)
                            $state = $this->_setState($state, 'info');
                        if ($usePercent > 80)
                            $state = $this->_setState($state, 'warning');
                        if ($usePercent > 90)
                            $state = $this->_setState($state, 'critical');
                        if ($usePercent > 95)
                            $state = $this->_setState($state, 'error');
                        break;
                }
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMemUsage() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mem_usage';
        /*
          Fetch the data into a array
         */
        $miData = shell_exec('cat /proc/meminfo');
        $memInfo = explode("\n", $miData);
        foreach ($memInfo as $line) {
            $part = preg_split('/:/', $line);
            $key = trim($part[0]);
            $tmp = explode(' ', trim($part[1]));
            $value = 0;
            if ($tmp[1] == 'kB')
                $value = $tmp[0] * 1024;
            $data[$key] = $value;
        }
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorCpu() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'cpu_info';
        /*
          Fetch the data into a array
         */
        if (file_exists('/proc/cpuinfo')) {
            $cpuData = shell_exec('cat /proc/cpuinfo');
            $cpuInfo = explode("\n", $cpuData);
            $processor = 0;
            foreach ($cpuInfo as $line) {
                $part = preg_split('/:/', $line);
                $key = trim($part[0]);
                $value = trim($part[1]);
                if ($key == 'processor')
                    $processor = intval($value);
                if ($key != '')
                    $data[$key . ' ' . $processor] = $value;
            }
            /* the cpu has no state. It is, what it is */
            $state = 'no_state';
        } else {
            /*
             * It is not Linux, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorServices() {
        global $app;
        global $conf;
        /** the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** get the "active" Services of the server from the DB */
        $services = $app->dbmaster->queryOneRecord('SELECT * FROM server WHERE server_id = ' . $server_id);
        /* The type of the Monitor-data */
        $type = 'services';
        /** the State of the monitoring */
        /* ok, if ALL active services are running,
         * error, if not
         * There is no other state!
         */
        $state = 'ok';
        /* Monitor Webserver */
        $data['webserver'] = -1; // unknown - not needed
        if ($services['web_server'] == 1) {
            if ($this->_checkTcp('localhost', 80)) {
                $data['webserver'] = 1;
            } else {
                $data['webserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor FTP-Server */
        $data['ftpserver'] = -1; // unknown - not needed
        if ($services['file_server'] == 1) {
            if ($this->_checkFtp('localhost', 21)) {
                $data['ftpserver'] = 1;
            } else {
                $data['ftpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor SMTP-Server */
        $data['smtpserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 25)) {
                $data['smtpserver'] = 1;
            } else {
                $data['smtpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor POP3-Server */
        $data['pop3server'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 110)) {
                $data['pop3server'] = 1;
            } else {
                $data['pop3server'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor IMAP-Server */
        $data['imapserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 143)) {
                $data['imapserver'] = 1;
            } else {
                $data['imapserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor BIND-Server */
        $data['bindserver'] = -1; // unknown - not needed
        if ($services['dns_server'] == 1) {
            if ($this->_checkTcp('localhost', 53)) {
                $data['bindserver'] = 1;
            } else {
                $data['bindserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor MySQL Server */
        $data['mysqlserver'] = -1; // unknown - not needed
        if ($services['db_server'] == 1) {
            if ($this->_checkTcp('localhost', 3306)) {
                $data['mysqlserver'] = 1;
            } else {
                $data['mysqlserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorOpenVzHost() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_veinfo';
        /*
          Fetch the data into a array
         */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeInfo();
        /* the VE-Info has no state. It is, what it is */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorOpenVzUserBeancounter() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_beancounter';
        /*
          Fetch the data into a array
         */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeBeanCounter();
        /* calculate the state of the beancounter */
        if ($data == '') {
            $state = 'no_state';
        } else {
            $state = 'ok';
            /* transfer this output-string into a array */
            $test = explode("\n", $data);
            /* the first list of the output is not needed */
            array_shift($test);
            /* now process all items of the rest */
            foreach ($test as $item) {
                /*
                 * eliminate all doubled spaces and spaces at the beginning and end
                 */
                while (strpos($item, '  ') !== false) {
                    $item = str_replace('  ', ' ', $item);
                }
                $item = trim($item);
                /*
                 * The failcounter is the LAST
                 */
                if ($item != '') {
                    $tmp = explode(' ', $item);
                    $failCounter = $tmp[sizeof($tmp) - 1];
                    if ($failCounter > 0)
                        $state = 'info';
                    if ($failCounter > 50)
                        $state = 'warning';
                    if ($failCounter > 200)
                        $state = 'critical';
                    if ($failCounter > 10000)
                        $state = 'error';
                }
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorSystemUpdate() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'system_update';
        /* This monitoring is only available on Debian or Ubuntu */
        if (file_exists('/etc/debian_version')) {
            /*
             * first update the "apt database"
             */
            shell_exec('apt-get update');
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
             */
            $aptData = shell_exec('apt-get -s -qq dist-upgrade');
            if ($aptData == '') {
                /* There is nothing to update! */
                $state = 'ok';
            } else {
                /*
                 * There is something to update! this is in most cases not critical, so we can
                 * do a system-update once a month or so...
                 */
                $state = 'info';
            }
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('apt-get -s -q dist-upgrade');
        } elseif (file_exists('/etc/gentoo-release')) {
            /*
             * first update the portage tree
             */
            // In keeping with gentoo's rsync policy, don't update to frequently (every four hours - taken from http://www.gentoo.org/doc/en/source_mirrors.xml)
            $do_update = true;
            if (file_exists('/usr/portage/metadata/timestamp.chk')) {
                $datetime = file_get_contents('/usr/portage/metadata/timestamp.chk');
                $datetime = trim($datetime);
                $dstamp = strtotime($datetime);
                if ($dstamp) {
                    $checkat = $dstamp + 14400; // + 4hours
                    if (mktime() < $checkat) {
                        $do_update = false;
                    }
                }
            }
            if ($do_update) {
                shell_exec('emerge --sync --quiet');
            }
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
             */
            $emergeData = shell_exec('glsa-check -t affected');
            if ($emergeData == '') {
                /* There is nothing to update! */
                $state = 'ok';
                $data['output'] = 'No unapplied GLSA\'s found on the system.';
            } else {
                /* There is something to update! */
                $state = 'info';
                $data['output'] = shell_exec('glsa-check -pv --nocolor affected 2>/dev/null');
            }
        } else {
            /*
             * It is not Debian/Ubuntu, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMailQueue() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mailq';
        /* Get the data from the mailq */
        $data['output'] = shell_exec('mailq');
        /*
         *  The last line has more informations
         */
        $tmp = explode("\n", $data['output']);
        $more = $tmp[sizeof($tmp) - 1];
        $this->_getIntArray($more);
        $data['bytes'] = $res[0];
        $data['requests'] = $res[1];
        /** The state of the mailq. */
        $state = 'ok';
        if ($data['requests'] > 2000)
            $state = 'info';
        if ($data['requests'] > 5000)
            $state = 'warning';
        if ($data['requests'] > 8000)
            $state = 'critical';
        if ($data['requests'] > 10000)
            $state = 'error';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorRaid() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'raid_state';
        /*
         * We support several RAID types, but if we can't find any of them, we have no data
         */
        $state = 'no_state';
        $data['output'] = '';
        /*
         * Check, if Software-RAID is enabled
         */
        if (file_exists('/proc/mdstat')) {
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('cat /proc/mdstat');
            /*
             * Then calc the state.
             */
            $tmp = explode("\n", $data['output']);
            $state = 'ok';
            for ($i = 0; $i < sizeof($tmp); $i++) {
                /* fetch the next line */
                $line = $tmp[$i];
                if ((strpos($line, '[U_]') !== false) || (strpos($line, '[_U]') !== false)) {
                    /* One Disk is not working.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of critical
                     */
                    $nextLine = $tmp[$i + 1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'critical');
                    } else {
                        $state = $this->_setState($state, 'info');
                    }
                }
                if (strpos($line, '[__]') !== false) {
                    /* both Disk are not working */
                    $state = $this->_setState($state, 'error');
                }
                if (strpos($line, '[UU]') !== false) {
                    /* The disks are OK.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of ok
                     */
                    $nextLine = $tmp[$i + 1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'ok');
                    } else {
                        $state = $this->_setState($state, 'info');
                    }
                }
            }
        }
        /*
         * Check, if we have mpt-status installed (LSIsoftware-raid)
         */
        if (file_exists('/proc/mpt/summary')) {
            system('which mpt-status', $retval);
            if ($retval === 0) {
                /*
                 * Fetch the output
                 */
                $data['output'] = shell_exec('mpt-status --autoload -n');
                /*
                 * Then calc the state.
                 */
                $state = 'ok';
                foreach ($data['output'] as $item) {
                    /*
                     * The output contains information for every RAID and every HDD.
                     * We only need the state of the RAID
                     */
                    if (strpos($item, 'raidlevel:') !== false) {
                        /*
                         * We found a raid, process the state of it
                         */
                        if (strpos($item, ' ONLINE ') !== false) {
                            $this->_setState($state, 'ok');
                        } elseif (strpos($item, ' OPTIMAL ') !== false) {
                            $this->_setState($state, 'ok');
                        } elseif (strpos($item, ' INITIAL ') !== false) {
                            $this->_setState($state, 'info');
                        } elseif (strpos($item, ' INACTIVE ') !== false) {
                            $this->_setState($state, 'critical');
                        } elseif (strpos($item, ' RESYNC ') !== false) {
                            $this->_setState($state, 'info');
                        } elseif (strpos($item, ' DEGRADED ') !== false) {
                            $this->_setState($state, 'critical');
                        } else {
                            /* we don't know the state. so we set the state to critical, that the
                             * admin is warned, that something is wrong
                             */
                            $this->_setState($state, 'critical');
                        }
                    }
                }
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorRkHunter() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'rkhunter';
        /* This monitoring is only available if rkhunter is installed */
        system('which rkhunter', $retval);
        if ($retval === 0) {
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('rkhunter --update --checkall --nocolors --skip-keypress');
            /*
             * At this moment, there is no state (maybe later)
             */
            $state = 'no_state';
        } else {
            /*
             * rkhunter is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorFail2ban() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_fail2ban';
        /* This monitoring is only available if fail2ban is installed */
        system('which fail2ban-client', $retval); // Debian, Ubuntu, Fedora
        if ($retval !== 0)
            system('which fail2ban', $retval); // CentOS
        if ($retval === 0) {
            /*  Get the data of the log */
            $data = $this->_getLogData($type);
            /*
             * At this moment, there is no state (maybe later)
             */
            $state = 'no_state';
        } else {
            /*
             * fail2ban is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data = '';
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorSysLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'sys_log';
        /*
         * is there any warning or error for this server?
         */
        $state = 'ok';
        $dbData = $app->dbmaster->queryAllRecords('SELECT loglevel FROM sys_log WHERE server_id = ' . $server_id . ' AND loglevel > 0');
        if (is_array($dbData)) {
            foreach ($dbData as $item) {
                if ($item['loglevel'] == 1)
                    $state = $this->_setState($state, 'warning');
                if ($item['loglevel'] == 2)
                    $state = $this->_setState($state, 'error');
            }
        }
        /** There is no monitor-data because the data is in the sys_log table */
        $data['output'] = '';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMailLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMailWarnLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_warn';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMailErrLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_err';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorMessagesLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_messages';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorISPCCronLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispc_cron';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorFreshClamLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_freshclam';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /* Get the data from the LAST log-Entry.
         * if there can be found:
         * WARNING: Your ClamAV installation is OUTDATED!
         * then the clamav is outdated. This is a warning!
         */
        $state = 'ok';
        $tmp = explode("\n", $data);
        $lastLog = array();
        if ($tmp[sizeof($tmp) - 1] == '') {
            /* the log ends with an empty line remove this */
            array_pop($tmp);
        }
        if (strpos($tmp[sizeof($tmp) - 1], '-------------') !== false) {
            /* the log ends with "-----..." remove this */
            array_pop($tmp);
        }
        for ($i = sizeof($tmp) - 1; $i > 0; $i--) {
            if (strpos($tmp[$i], '---------') === false) {
                /* no delimiter found, so add this to the last-log */
                $lastLog[] = $tmp[$i];
            } else {
                /* delimiter found, so there is no more line left! */
                break;
            }
        }
        /*
         * Now we have the last log in the array.
         * Check if the outdated-string is found...
         */
        foreach ($lastLog as $line) {
            if (strpos(strtolower($line), 'outdated') !== false) {
                /*
                 * Outdatet is only info, because if we set this to warning, the server is
                 * as long in state warning, as there is a new version of ClamAv which takes
                 * sometimes weeks!
                 */
                $state = $this->_setState($state, 'info');
            }
        }
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorClamAvLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_clamav';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function monitorIspConfigLog() {
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispconfig';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
        /*
         * Return the Result
         */
        $res['server_id'] = $server_id;
        $res['type'] = $type;
        $res['data'] = $data;
        $res['state'] = $state;
        return $res;
    }
    public function _getLogData($log) {
        global $conf;
        $dist = '';
        $logfile = '';
        if (@is_file('/etc/debian_version')) {
            $dist = 'debian';
        } elseif (@is_file('/etc/redhat-release')) {
            $dist = 'redhat';
        } elseif (@is_file('/etc/SuSE-release')) {
            $dist = 'suse';
        } elseif (@is_file('/etc/gentoo-release')) {
            $dist = 'gentoo';
        }
        switch ($log) {
            case 'log_mail':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.log';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.info';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_mail_warn':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.warn';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.warn';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_mail_err':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.err';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.err';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_messages':
                if ($dist == 'debian') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/messages';
                }
                break;
            case 'log_ispc_cron':
                if ($dist == 'debian') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'redhat') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'suse') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/cron';
                }
                break;
            case 'log_freshclam':
                if ($dist == 'debian') {
                    $logfile = '/var/log/clamav/freshclam.log';
                } elseif ($dist == 'redhat') {
                    $logfile = (is_file('/var/log/clamav/freshclam.log') ? '/var/log/clamav/freshclam.log' : '/var/log/freshclam.log');
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/freshclam.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/clamav/freshclam.log';
                }
                break;
            case 'log_clamav':
                if ($dist == 'debian') {
                    $logfile = '/var/log/clamav/clamav.log';
                } elseif ($dist == 'redhat') {
                    $logfile = (is_file('/var/log/clamav/clamd.log') ? '/var/log/clamav/clamd.log' : '/var/log/maillog');
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/clamd.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/clamav/clamd.log';
                }
                break;
            case 'log_fail2ban':
                if ($dist == 'debian') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/fail2ban.log';
                }
                break;
            case 'log_ispconfig':
                if ($dist == 'debian') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'redhat') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'suse') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                }
                break;
            default:
                $logfile = '';
                break;
        }
        // Getting the logfile content
        if ($logfile != '') {
            $logfile = escapeshellcmd($logfile);
            if (stristr($logfile, ';') or substr($logfile, 0, 9) != '/var/log/' or stristr($logfile, '..')) {
                $log = 'Logfile path error.';
            } else {
                $log = '';
                if (is_readable($logfile)) {
                    $fd = popen('tail -n 100 ' . $logfile, 'r');
                    if ($fd) {
                        while (!feof($fd)) {
                            $log .= fgets($fd, 4096);
                            $n++;
                            if ($n > 1000)
                                break;
                        }
                        fclose($fd);
                    }
                } else {
                    $log = 'Unable to read ' . $logfile;
                }
            }
        }
        return $log;
    }
    private function _checkTcp($host, $port) {
        $fp = @fsockopen($host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    private function _checkUdp($host, $port) {
        $fp = @fsockopen('udp://' . $host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    private function _checkFtp($host, $port) {
        $conn_id = @ftp_connect($host, $port);
        if ($conn_id) {
            @ftp_close($conn_id);
            return true;
        } else {
            return false;
        }
    }
    private function _getIntArray($line) {
        /** The array of float found */
        $res = array();
        /* First build a array from the line */
        $data = explode(' ', $line);
        /* then check if any item is a float */
        foreach ($data as $item) {
            if ($item . '' == (int) $item . '') {
                $res[] = $item;
            }
        }
        return $res;
    }
}
?>
server/mods-available/monitor_core_module.inc.php
@@ -1,369 +1,186 @@
<?php
/*
Copyright (c) 2007-2010, Till Brehm, projektfarm Gmbh and Oliver Vogel www.muv.com
All rights reserved.
  Copyright (c) 2007-2011, Till Brehm, projektfarm Gmbh and Oliver Vogel www.muv.com
  All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
  Redistribution and use in source and binary forms, with or without modification,
  are permitted provided that the following conditions are met:
    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright notice,
      this list of conditions and the following disclaimer in the documentation
      and/or other materials provided with the distribution.
    * Neither the name of ISPConfig nor the names of its contributors
      may be used to endorse or promote products derived from this software without
      specific prior written permission.
 * Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation
  and/or other materials provided with the distribution.
 * Neither the name of ISPConfig nor the names of its contributors
  may be used to endorse or promote products derived from this software without
  specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
class monitor_core_module {
    var $interval = 5; // do the monitoring every 5 minutes
    var $interval = 5; // do the monitoring every 5 minutes
    var $module_name = 'monitor_core_module';
    var $class_name = 'monitor_core_module';
    /* No actions at this time. maybe later... */
    var $actions_available = array();
    /** The Tools*/
    private $_tools = null;
    //* This function is called during ispconfig installation to determine
    //  if a symlink shall be created for this plugin.
    function onInstall() {
    /**
     * This function is called during ispconfig installation to determine
     * if a symlink shall be created for this plugin.
     */
    public function onInstall() {
        global $conf;
        return true;
    }
    /*
        This function is called when the module is loaded
    */
    function onLoad() {
    /**
     * This function is called when the module is loaded
     */
    public function onLoad() {
        global $app;
        /*
         * Do the monitor every n minutes and write the result to the db
        */
         * Do the monitor every n minutes and write the result to the db
         */
        $min = @date('i');
        if (($min % $this->interval) == 0) {
            $this->doMonitor();
            $this->_doMonitor();
        }
    }
    /*
     This function is called when a change in one of the registered tables is detected.
     The function then raises the events for the plugins.
    */
    function process($tablename, $action, $data) {
    /**
     * This function is called when a change in one of the registered tables is detected.
     * The function then raises the events for the plugins.
     */
    public function process($tablename, $action, $data) {
        // not needed
    } // end function
    //** Get distribution identifier
    //** IMPORTANT!
    //   This is the same code as in install/lib/install.lib.php
    //   So if you change it here, you also have to change it in there!
    //   Please do not forget to remove the swriteln(); - lines here at this file
    function get_distname() {
        $distname = '';
        $distver = '';
        $distid = '';
        $distbaseid = '';
        //** Debian or Ubuntu
        if(file_exists('/etc/debian_version')) {
            if(trim(file_get_contents('/etc/debian_version')) == '4.0') {
                $distname = 'Debian';
                $distver = '4.0';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif(strstr(trim(file_get_contents('/etc/debian_version')),'5.0')) {
                $distname = 'Debian';
                $distver = 'Lenny';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif(strstr(trim(file_get_contents('/etc/debian_version')),'6.0') || trim(file_get_contents('/etc/debian_version')) == 'squeeze/sid') {
                $distname = 'Debian';
                $distver = 'Squeeze/Sid';
                $distid = 'debian60';
                $distbaseid = 'debian';
            }  else {
                $distname = 'Debian';
                $distver = 'Unknown';
                $distid = 'debian40';
                $distbaseid = 'debian';
            }
        }
        //** OpenSuSE
        elseif(file_exists('/etc/SuSE-release')) {
            if(stristr(file_get_contents('/etc/SuSE-release'),'11.0')) {
                $distname = 'openSUSE';
                $distver = '11.0';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif(stristr(file_get_contents('/etc/SuSE-release'),'11.1')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif(stristr(file_get_contents('/etc/SuSE-release'),'11.2')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            }  else {
                $distname = 'openSUSE';
                $distver = 'Unknown';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            }
        }
        //** Redhat
        elseif(file_exists('/etc/redhat-release')) {
            $content = file_get_contents('/etc/redhat-release');
            if(stristr($content,'Fedora release 9 (Sulphur)')) {
                $distname = 'Fedora';
                $distver = '9';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif(stristr($content,'Fedora release 10 (Cambridge)')) {
                $distname = 'Fedora';
                $distver = '10';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif(stristr($content,'Fedora release 10')) {
                $distname = 'Fedora';
                $distver = '11';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif(stristr($content,'CentOS release 5.2 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.2';
                $distid = 'centos52';
                $distbaseid = 'fedora';
            } elseif(stristr($content,'CentOS release 5.3 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.3';
                $distid = 'centos53';
                $distbaseid = 'fedora';
            } else {
                $distname = 'Redhat';
                $distver = 'Unknown';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            }
        }
        //** Gentoo
        elseif(file_exists('/etc/gentoo-release')) {
            $content = file_get_contents('/etc/gentoo-release');
            preg_match_all('/([0-9]{1,2})/', $content, $version);
            $distname = 'Gentoo';
            $distver = $version[0][0].$version[0][1];
            $distid = 'gentoo';
            $distbaseid = 'gentoo';
        } else {
            die('Unrecognized GNU/Linux distribution');
        }
        return array('name' => $distname, 'version' => $distver, 'id' => $distid, 'baseid' => $distbaseid);
    }
    /*
    This method is called every n minutes, when the module ist loaded.
    The method then does a system-monitoring
    */
    /**
     * This method is called every n minutes, when the module ist loaded.
     * The method then does a system-monitoring
     */
    // TODO: what monitoring is done should be a config-var
    function doMonitor() {
        /* Calls the single Monitoring steps */
        $this->monitorHDQuota();
        $this->monitorServer();
        $this->monitorOSVer();
        $this->monitorIspCVer();
        $this->monitorDiskUsage();
        $this->monitorMemUsage();
        $this->monitorCpu();
        $this->monitorServices();
        if(@file_exists('/proc/user_beancounters')) {
            $this->monitorOpenVzHost();
            $this->monitorOpenVzUserBeancounter();
        }
        $this->monitorMailLog();
        $this->monitorMailWarnLog();
        $this->monitorMailErrLog();
        $this->monitorMessagesLog();
        $this->monitorISPCCronLog();
        $this->monitorFreshClamLog();
        $this->monitorClamAvLog();
        $this->monitorIspConfigLog();
        $this->monitorSystemUpdate();
        $this->monitorMailQueue();
        $this->monitorRaid();
        $this->monitorRkHunter();
        $this->monitorFail2ban();
        $this->monitorSysLog();
    }
    function monitorHDQuota() {
        global $app;
        global $conf;
    private function _doMonitor() {
        /*
         * We need the tools in almost every method, so initialize them once...
         */
        $app->load('monitor_tools');
        $this->_tools = new monitor_tools();
        
        /* Initialize data array */
        $data = array();
        /*
         * Calls the single Monitoring steps
         */
        $this->_monitorHDQuota();
        $this->_monitorServer();
        $this->_monitorOsVer();
        $this->_monitorIspcVer();
        $this->_monitorDiskUsage();
        $this->_monitorMemUsage();
        $this->_monitorCpu();
        $this->_monitorServices();
        if (@file_exists('/proc/user_beancounters')) {
            $this->_monitorOpenVzHost();
            $this->_monitorOpenVzUserBeancounter();
        }
        $this->_monitorMailLog();
        $this->_monitorMailWarnLog();
        $this->_monitorMailErrLog();
        $this->_monitorMessagesLog();
        $this->_monitorISPCCronLog();
        $this->_monitorFreshClamLog();
        $this->_monitorClamAvLog();
        $this->_monitorIspConfigLog();
        $this->_monitorSystemUpdate();
        $this->_monitorMailQueue();
        $this->_monitorRaid();
        $this->_monitorRkHunter();
        $this->_monitorFail2ban();
        $this->_monitorSysLog();
    }
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
    private function _monitorHDQuota() {
        global $app;
        /** The type of the data */
        $type = 'harddisk_quota';
        /** The state of the harddisk_quota. */
        $state = 'ok';
        /*
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorHDQuota();
        
        /** Fetch the data for all users*/
        $dfData = shell_exec('repquota -au');
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
        // split into array
        $df = explode("\n", $dfData);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    private function _monitorServer() {
        global $app;
        /*
         * ignore the first 5 lines, process the rest
        */
        for($i=5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                */
                $s = preg_split ('/[\s]+/', $df[$i]);
                $username = $s[0];
                if(substr($username,0,3) == 'web') {
                if(isset($data['user'][$username])) {
                    $data['user'][$username]['used'] += $s[2];
                    $data['user'][$username]['soft'] += $s[3];
                    $data['user'][$username]['hard'] += $s[4];
                } else {
                    $data['user'][$username]['used'] = $s[2];
                    $data['user'][$username]['soft'] = $s[3];
                    $data['user'][$username]['hard'] = $s[4];
                }
                }
            }
        }
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorServer();
        
        /** Fetch the data for all users*/
        $dfData = shell_exec('repquota -ag');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first 5 lines, process the rest
        */
        for($i=5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                */
                $s = preg_split ('/[\s]+/', $df[$i]);
                $groupname = $s[0];
                if(substr($groupname,0,6) == 'client') {
                if(isset($data['group'][$groupname])) {
                    $data['group'][$groupname]['used'] += $s[1];
                    $data['group'][$groupname]['soft'] += $s[2];
                    $data['group'][$groupname]['hard'] += $s[3];
                } else {
                    $data['group'][$groupname]['used'] = $s[1];
                    $data['group'][$groupname]['soft'] = $s[2];
                    $data['group'][$groupname]['hard'] = $s[3];
                }
                }
            }
        }
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorServer() {
    private function _monitorOsVer() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'server_load';
        /*
        Fetch the data into a array
        */
        $procUptime = shell_exec("cat /proc/uptime | cut -f1 -d' '");
        $data['up_days'] = floor($procUptime/86400);
        $data['up_hours'] = floor(($procUptime-$data['up_days']*86400)/3600);
        $data['up_minutes'] = floor(($procUptime-$data['up_days']*86400-$data['up_hours']*3600)/60);
        $data['uptime'] = shell_exec('uptime');
        $tmp = explode(',', $data['uptime'], 4);
        $tmpUser = explode(' ', trim($tmp[2]));
        $data['user_online'] = intval($tmpUser[0]);
        //* New Load Average code to fix "always zero" bug in non-english distros. NEEDS TESTING
        $loadTmp = shell_exec("cat /proc/loadavg | cut -f1-3 -d' '");
        $load = explode(' ', $loadTmp);
        $data['load_1'] = floatval(str_replace(',', '.', $load[0]));
        $data['load_5'] = floatval(str_replace(',', '.', $load[1]));
        $data['load_15'] = floatval(str_replace(',', '.', $load[2]));
        /** The state of the server-load. */
        $state = 'ok';
        if ($data['load_1'] > 20 ) $state = 'info';
        if ($data['load_1'] > 50 ) $state = 'warning';
        if ($data['load_1'] > 100 ) $state = 'critical';
        if ($data['load_1'] > 150 ) $state = 'error';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorOsVer();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -371,37 +188,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorOsVer() {
    private function _monitorIspcVer() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'os_info';
        /*
        Fetch the data into a array
        */
        $dist = $this->get_distname();
        $data['name'] = $dist['name'];
        $data['version'] = $dist['version'];
        /* the OS has no state. It is, what it is */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorIspcVer();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -409,36 +213,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorIspcVer() {
    private function _monitorDiskUsage() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'ispc_info';
        /*
        Fetch the data into a array
        */
        $data['name'] = ISPC_APP_TITLE;
        $data['version'] = ISPC_APP_VERSION;
        /* the ISPC-Version has no state. It is, what it is */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorDiskUsage();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -446,76 +238,23 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorDiskUsage() {
    private function _monitorMemUsage() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'disk_usage';
        /** The state of the disk-usage */
        $state = 'ok';
        /** Fetch the data of ALL devices into a array (needed for monitoring!)*/
        $dfData = shell_exec('df -hT');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first line, process the rest
        */
        for($i=1; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make an array of the data
                */
                $s = preg_split ('/[\s]+/', $df[$i]);
                $data[$i]['fs'] = $s[0];
                $data[$i]['type'] = $s[1];
                $data[$i]['size'] = $s[2];
                $data[$i]['used'] = $s[3];
                $data[$i]['available'] = $s[4];
                $data[$i]['percent'] = $s[5];
                $data[$i]['mounted'] = $s[6];
                /*
                 * calculate the state
                */
                $usePercent = floatval($data[$i]['percent']);
                //* We don't want to check some filesystem which have no sensible filling levels
                switch($data[$i]['type']) {
                    case 'iso9660':
                    case 'cramfs':
                    case 'udf':
                    case 'tmpfs':
                    case 'devtmpfs':
                    case 'udev':
                        break;
                    default:
                        if ($usePercent > 75) $state = $this->_setState($state, 'info');
                        if ($usePercent > 80) $state = $this->_setState($state, 'warning');
                        if ($usePercent > 90) $state = $this->_setState($state, 'critical');
                        if ($usePercent > 95) $state = $this->_setState($state, 'error');
                        break;
                }
            }
        }
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMemUsage();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -523,49 +262,23 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMemUsage() {
    private function _monitorCpu() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mem_usage';
        /*
        Fetch the data into a array
        */
        $miData = shell_exec('cat /proc/meminfo');
        $memInfo = explode("\n", $miData);
        foreach($memInfo as $line) {
            $part = preg_split('/:/', $line);
            $key = trim($part[0]);
            $tmp = explode(' ', trim($part[1]));
            $value = 0;
            if ($tmp[1] == 'kB') $value = $tmp[0] * 1024;
            $data[$key] = $value;
        }
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorCpu();
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -573,61 +286,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorCpu() {
    private function _monitorServices() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'cpu_info';
        /*
        Fetch the data into a array
        */
        if(file_exists('/proc/cpuinfo')) {
            $cpuData = shell_exec('cat /proc/cpuinfo');
            $cpuInfo = explode("\n", $cpuData);
            $processor = 0;
            foreach($cpuInfo as $line) {
                $part = preg_split('/:/', $line);
                $key = trim($part[0]);
                $value = trim($part[1]);
                if($key == 'processor') $processor = intval($value);
                if($key != '') $data[$key.' '.$processor] = $value;
            }
            /* the cpu has no state. It is, what it is */
            $state = 'no_state';
        } else {
            /*
             * It is not Linux, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
            */
            $state = 'no_state';
            $data['output']= '';
        }
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorServices();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -635,115 +311,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorServices() {
    private function _monitorOpenVzHost() {
        global $app;
        global $conf;
        /** the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** get the "active" Services of the server from the DB */
        $services = $app->dbmaster->queryOneRecord('SELECT * FROM server WHERE server_id = ' . $server_id);
        /* The type of the Monitor-data */
        $type = 'services';
        /** the State of the monitoring */
        /* ok, if ALL active services are running,
         * error, if not
         * There is no other state!
        */
        $state = 'ok';
        /* Monitor Webserver */
        $data['webserver'] = -1; // unknown - not needed
        if ($services['web_server'] == 1) {
            if($this->_checkTcp('localhost', 80)) {
                $data['webserver'] = 1;
            } else {
                $data['webserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor FTP-Server */
        $data['ftpserver'] = -1; // unknown - not needed
        if ($services['file_server'] == 1) {
            if($this->_checkFtp('localhost', 21)) {
                $data['ftpserver'] = 1;
            } else {
                $data['ftpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor SMTP-Server */
        $data['smtpserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if($this->_checkTcp('localhost', 25)) {
                $data['smtpserver'] = 1;
            } else {
                $data['smtpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor POP3-Server */
        $data['pop3server'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if($this->_checkTcp('localhost', 110)) {
                $data['pop3server'] = 1;
            } else {
                $data['pop3server'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor IMAP-Server */
        $data['imapserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if($this->_checkTcp('localhost', 143)) {
                $data['imapserver'] = 1;
            } else {
                $data['imapserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor BIND-Server */
        $data['bindserver'] = -1; // unknown - not needed
        if ($services['dns_server'] == 1) {
            if($this->_checkTcp('localhost', 53)) {
                $data['bindserver'] = 1;
            } else {
                $data['bindserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor MySQL Server */
        $data['mysqlserver'] = -1; // unknown - not needed
        if ($services['db_server'] == 1) {
            if($this->_checkTcp('localhost', 3306)) {
                $data['mysqlserver'] = 1;
            } else {
                $data['mysqlserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /*
        Insert the data into the database
        */
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorOpenVzHost();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -751,37 +336,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorOpenVzHost() {
    private function _monitorOpenVzUserBeancounter() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_veinfo';
        /*
        Fetch the data into a array
        */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeInfo();
        /* the VE-Info has no state. It is, what it is */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorOpenVzUserBeancounter();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -789,192 +361,34 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorOpenVzUserBeancounter() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_beancounter';
    private function _monitorSystemUpdate() {
        /*
        Fetch the data into a array
        */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeBeanCounter();
        /* calculate the state of the beancounter */
        if ($data == '') {
            $state = 'no_state';
        }
        else {
            $state = 'ok';
            /* transfer this output-string into a array */
            $test = explode("\n", $data);
            /* the first list of the output is not needed */
            array_shift($test);
            /* now process all items of the rest */
            foreach ($test as $item) {
                /*
                 * eliminate all doubled spaces and spaces at the beginning and end
                */
                while (strpos($item, '  ') !== false) {
                    $item = str_replace('  ', ' ', $item);
                }
                $item = trim($item);
                /*
                 * The failcounter is the LAST
                */
                if ($item != '') {
                    $tmp = explode(' ', $item);
                    $failCounter = $tmp[sizeof($tmp)-1];
                    if ($failCounter > 0 ) $state = 'info';
                    if ($failCounter > 50 ) $state = 'warning';
                    if ($failCounter > 200 ) $state = 'critical';
                    if ($failCounter > 10000 ) $state = 'error';
                }
            }
        }
        /*
        Insert the data into the database
        */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorSystemUpdate() {
        /*
         *  This monitoring is expensive, so do it only once an hour
        */
         *  This monitoring is expensive, so do it only once an hour
         */
        $min = date('i');
        if ($min != 0) return;
        if ($min != 0)
            return;
        /*
         * OK - here we go...
        */
         * OK - here we go...
         */
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'system_update';
        /* This monitoring is only available on Debian or Ubuntu */
        if(file_exists('/etc/debian_version')) {
            /*
             * first update the "apt database"
            */
            shell_exec('apt-get update');
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
            */
            $aptData = shell_exec('apt-get -s -qq dist-upgrade');
            if ($aptData == '') {
                /* There is nothing to update! */
                $state = 'ok';
            }
            else {
                /*
                 * There is something to update! this is in most cases not critical, so we can
                 * do a system-update once a month or so...
                */
                $state = 'info';
            }
            /*
             * Fetch the output
            */
            $data['output'] = shell_exec('apt-get -s -q dist-upgrade');
        }
        elseif (file_exists('/etc/gentoo-release')) {
            /*
             * first update the portage tree
            */
            // In keeping with gentoo's rsync policy, don't update to frequently (every four hours - taken from http://www.gentoo.org/doc/en/source_mirrors.xml)
            $do_update = true;
            if (file_exists('/usr/portage/metadata/timestamp.chk')) {
                $datetime = file_get_contents('/usr/portage/metadata/timestamp.chk');
                $datetime = trim($datetime);
                $dstamp = strtotime($datetime);
                if ($dstamp) {
                    $checkat = $dstamp + 14400; // + 4hours
                    if (mktime() < $checkat) {
                        $do_update = false;
                    }
                }
            }
            if ($do_update) {
                shell_exec('emerge --sync --quiet');
            }
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
            */
            $emergeData = shell_exec('glsa-check -t affected');
            if ($emergeData == '') {
                /* There is nothing to update! */
                $state = 'ok';
                $data['output'] = 'No unapplied GLSA\'s found on the system.';
            }
            else {
                /* There is something to update! */
                $state = 'info';
                $data['output'] = shell_exec('glsa-check -pv --nocolor affected 2>/dev/null');
            }
        }
        else {
            /*
             * It is not Debian/Ubuntu, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
            */
            $state = 'no_state';
            $data['output']= '';
        }
        /*
         * Insert the data into the database
        */
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorSystemUpdate();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -982,45 +396,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMailQueue() {
    private function _monitorMailQueue() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mailq';
        /* Get the data from the mailq */
        $data['output'] = shell_exec('mailq');
        /*
         *  The last line has more informations
        */
        $tmp = explode("\n", $data['output']);
        $more = $tmp[sizeof($tmp) - 1];
        $this->_getIntArray($more);
        $data['bytes'] = $res[0];
        $data['requests'] = $res[1];
        /** The state of the mailq. */
        $state = 'ok';
        if ($data['requests'] > 2000 ) $state = 'info';
        if ($data['requests'] > 5000 ) $state = 'warning';
        if ($data['requests'] > 8000 ) $state = 'critical';
        if ($data['requests'] > 10000 ) $state = 'error';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMailQueue();
        /*
         * Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1028,138 +421,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorRaid() {
    private function _monitorRaid() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'raid_state';
        /*
         * We support several RAID types, but if we can't find any of them, we have no data
        */
        $state = 'no_state';
        $data['output']= '';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorRaid();
        /*
         * Check, if Software-RAID is enabled
        */
        if(file_exists('/proc/mdstat')) {
            /*
             * Fetch the output
            */
            $data['output'] = shell_exec('cat /proc/mdstat');
            /*
             * Then calc the state.
            */
            $tmp = explode("\n", $data['output']);
            $state = 'ok';
            for ($i = 0; $i < sizeof($tmp); $i++) {
                /* fetch the next line */
                $line = $tmp[$i];
                if ((strpos($line, '[U_]') !== false) || (strpos($line, '[_U]') !== false)) {
                    /* One Disk is not working.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of critical
                    */
                    $nextLine = $tmp[$i+1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'critical');
                    }
                    else {
                        $state = $this->_setState($state, 'info');
                    }
                }
                if (strpos($line, '[__]') !== false) {
                    /* both Disk are not working */
                    $state = $this->_setState($state, 'error');
                }
                if (strpos($line, '[UU]') !== false) {
                    /* The disks are OK.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of ok
                    */
                    $nextLine = $tmp[$i+1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'ok');
                    }
                    else {
                        $state = $this->_setState($state, 'info');
                    }
                }
            }
        }
        /*
         * Check, if we have mpt-status installed (LSIsoftware-raid)
        */
        if(file_exists('/proc/mpt/summary')) {
            system('which mpt-status', $retval);
            if($retval === 0) {
                /*
                * Fetch the output
                */
                $data['output'] = shell_exec('mpt-status --autoload -n');
                /*
                * Then calc the state.
                */
                $state = 'ok';
                foreach ($data['output'] as $item) {
                    /*
                    * The output contains information for every RAID and every HDD.
                    * We only need the state of the RAID
                    */
                    if (strpos($item, 'raidlevel:') !== false) {
                        /*
                        * We found a raid, process the state of it
                        */
                        if (strpos($item, ' ONLINE ') !== false) {
                            $this->_setState($state, 'ok');
                        }
                        elseif (strpos($item, ' OPTIMAL ') !== false) {
                            $this->_setState($state, 'ok');
                        }
                        elseif (strpos($item, ' INITIAL ') !== false) {
                            $this->_setState($state, 'info');
                        }
                        elseif (strpos($item, ' INACTIVE ') !== false) {
                            $this->_setState($state, 'critical');
                        }
                        elseif (strpos($item, ' RESYNC ') !== false) {
                            $this->_setState($state, 'info');
                        }
                        elseif (strpos($item, ' DEGRADED ') !== false) {
                            $this->_setState($state, 'critical');
                        }
                        else {
                            /* we don't know the state. so we set the state to critical, that the
                            * admin is warned, that something is wrong
                            */
                            $this->_setState($state, 'critical');
                        }
                    }
                }
            }
        }
        /*
         * Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1167,60 +446,34 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorRkHunter() {
    private function _monitorRkHunter() {
        /*
         *  This monitoring is expensive, so do it only once a day
        */
         *  This monitoring is expensive, so do it only once a day
         */
        $min = date('i');
        $hour = date('H');
        if (!($min == 0 && $hour == 23)) return;
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'rkhunter';
        /* This monitoring is only available if rkhunter is installed */
        system('which rkhunter', $retval);
        if($retval === 0) {
            /*
             * Fetch the output
            */
            $data['output'] = shell_exec('rkhunter --update --checkall --nocolors --skip-keypress');
            /*
             * At this moment, there is no state (maybe later)
            */
            $state = 'no_state';
        }
        else {
            /*
             * rkhunter is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
            */
            $state = 'no_state';
            $data['output']= '';
        }
        if (!($min == 0 && $hour == 23))
            return;
        /*
         * Insert the data into the database
        */
         * OK . here we go...
         */
        global $app;
        /*
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorRkHunter();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1228,52 +481,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorFail2ban() {
    private function _monitorFail2ban() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_fail2ban';
        /* This monitoring is only available if fail2ban is installed */
        system('which fail2ban-client', $retval); // Debian, Ubuntu, Fedora
        if($retval !== 0) system('which fail2ban', $retval); // CentOS
        if($retval === 0) {
            /*  Get the data of the log */
            $data = $this->_getLogData($type);
            /*
             * At this moment, there is no state (maybe later)
            */
            $state = 'no_state';
        }
        else {
            /*
             * fail2ban is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
            */
            $state = 'no_state';
            $data = '';
        }
        /*
         * Insert the data into the database
        */
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorFail2ban();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1281,41 +506,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorSysLog() {
    private function _monitorSysLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'sys_log';
        /*
         * is there any warning or error for this server?
        */
        $state = 'ok';
        $dbData = $app->dbmaster->queryAllRecords('SELECT loglevel FROM sys_log WHERE server_id = ' . $server_id . ' AND loglevel > 0');
        if (is_array($dbData)) {
            foreach($dbData as $item) {
                if ($item['loglevel'] == 1) $state = $this->_setState($state, 'warning');
                if ($item['loglevel'] == 2) $state = $this->_setState($state, 'error');
            }
        }
        /** There is no monitor-data because the data is in the sys_log table */
        $data['output']= '';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorSysLog();
        /*
         * Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1323,35 +531,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMailLog() {
    private function _monitorMailLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMailLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1359,35 +556,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMailWarnLog() {
    private function _monitorMailWarnLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_warn';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMailWarnLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1395,35 +581,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMailErrLog() {
    private function _monitorMailErrLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_err';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMailErrLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1431,36 +606,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorMessagesLog() {
    private function _monitorMessagesLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_messages';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorMessagesLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1468,35 +631,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorISPCCronLog() {
    private function _monitorISPCCronLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispc_cron';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
        */
        $state = 'no_state';
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorISPCCronLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1504,72 +656,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorFreshClamLog() {
    private function _monitorFreshClamLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_freshclam';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /* Get the data from the LAST log-Entry.
         * if there can be found:
         * WARNING: Your ClamAV installation is OUTDATED!
         * then the clamav is outdated. This is a warning!
        */
        $state = 'ok';
        $tmp = explode("\n", $data);
        $lastLog = array();
        if ($tmp[sizeof($tmp)-1] == '') {
            /* the log ends with an empty line remove this */
            array_pop($tmp);
        }
        if (strpos($tmp[sizeof($tmp)-1], '-------------') !== false) {
            /* the log ends with "-----..." remove this */
            array_pop($tmp);
        }
        for ($i = sizeof($tmp) -1; $i > 0; $i--) {
            if (strpos($tmp[$i], '---------') === false) {
                /* no delimiter found, so add this to the last-log */
                $lastLog[] = $tmp[$i];
            }
            else {
                /* delimiter found, so there is no more line left! */
                break;
            }
        }
        /*
         * Now we have the last log in the array.
         * Check if the outdated-string is found...
        */
        foreach($lastLog as $line) {
            if (strpos(strtolower($line), 'outdated') !== false) {
                /*
                 * Outdatet is only info, because if we set this to warning, the server is
                 * as long in state warning, as there is a new version of ClamAv which takes
                 * sometimes weeks!
                */
                $state = $this->_setState($state, 'info');
            }
        }
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorFreshClamLog();
        /*
        Insert the data into the database
        */
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1577,32 +681,24 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorClamAvLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_clamav';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
    private function _monitorClamAvLog() {
            global $app;
        /*
        Insert the data into the database
        */
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorClamAvLog();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
@@ -1610,182 +706,36 @@
        $this->_delOldRecords($type, 4);
    }
    function monitorIspConfigLog() {
    private function _monitorIspConfigLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispconfig';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
        /*
        Insert the data into the database
        */
         * First we get the Monitoring-data from the tools
         */
        $res = $this->_tools->monitorIspConfigLog();
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES ('.
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                'VALUES (' .
                $res['server_id'] . ', ' .
                "'" . $app->dbmaster->quote($res['type']) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                "'" . $app->dbmaster->quote(serialize($res['data'])) . "', " .
                "'" . $res['state'] . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function _getLogData($log) {
        global $conf;
        $dist = '';
        $logfile = '';
        if(@is_file('/etc/debian_version')) {
            $dist = 'debian';
        } elseif(@is_file('/etc/redhat-release')) {
            $dist = 'redhat';
        } elseif(@is_file('/etc/SuSE-release')) {
            $dist = 'suse';
        } elseif(@is_file('/etc/gentoo-release')) {
            $dist = 'gentoo';
        }
        switch($log) {
            case 'log_mail':
                if($dist == 'debian') { $logfile = '/var/log/mail.log'; }
                elseif($dist == 'redhat') { $logfile = '/var/log/maillog'; }
                elseif($dist == 'suse') { $logfile = '/var/log/mail.info'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/maillog'; }
                break;
            case 'log_mail_warn':
                if($dist == 'debian') { $logfile = '/var/log/mail.warn'; }
                elseif($dist == 'redhat') { $logfile = '/var/log/maillog'; }
                elseif($dist == 'suse') { $logfile = '/var/log/mail.warn'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/maillog'; }
                break;
            case 'log_mail_err':
                if($dist == 'debian') { $logfile = '/var/log/mail.err'; }
                elseif($dist == 'redhat') { $logfile = '/var/log/maillog'; }
                elseif($dist == 'suse') { $logfile = '/var/log/mail.err'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/maillog'; }
                break;
            case 'log_messages':
                if($dist == 'debian') { $logfile = '/var/log/messages'; }
                elseif($dist == 'redhat') { $logfile = '/var/log/messages'; }
                elseif($dist == 'suse') { $logfile = '/var/log/messages'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/messages'; }
                break;
            case 'log_ispc_cron':
                if($dist == 'debian') { $logfile = $conf['ispconfig_log_dir'].'/cron.log'; }
                elseif($dist == 'redhat') { $logfile = $conf['ispconfig_log_dir'].'/cron.log'; }
                elseif($dist == 'suse') { $logfile = $conf['ispconfig_log_dir'].'/cron.log'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/cron'; }
                break;
            case 'log_freshclam':
                if($dist == 'debian') { $logfile = '/var/log/clamav/freshclam.log'; }
                elseif($dist == 'redhat') { $logfile = (is_file('/var/log/clamav/freshclam.log') ? '/var/log/clamav/freshclam.log' : '/var/log/freshclam.log'); }
                elseif($dist == 'suse') { $logfile = '/var/log/freshclam.log'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/clamav/freshclam.log'; }
                break;
            case 'log_clamav':
                if($dist == 'debian') { $logfile = '/var/log/clamav/clamav.log'; }
                elseif($dist == 'redhat') { $logfile = (is_file('/var/log/clamav/clamd.log') ? '/var/log/clamav/clamd.log' : '/var/log/maillog'); }
                elseif($dist == 'suse') { $logfile = '/var/log/clamd.log'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/clamav/clamd.log'; }
                break;
            case 'log_fail2ban':
                if($dist == 'debian') { $logfile = '/var/log/fail2ban.log'; }
                elseif($dist == 'redhat') { $logfile = '/var/log/fail2ban.log'; }
                elseif($dist == 'suse') { $logfile = '/var/log/fail2ban.log'; }
                elseif($dist == 'gentoo') { $logfile = '/var/log/fail2ban.log'; }
                break;
            case 'log_ispconfig':
                if($dist == 'debian') { $logfile = $conf['ispconfig_log_dir'].'/ispconfig.log'; }
                elseif($dist == 'redhat') { $logfile = $conf['ispconfig_log_dir'].'/ispconfig.log'; }
                elseif($dist == 'suse') { $logfile = $conf['ispconfig_log_dir'].'/ispconfig.log'; }
                elseif($dist == 'gentoo') { $logfile = $conf['ispconfig_log_dir'].'/ispconfig.log'; }
                break;
            default:
                $logfile = '';
                break;
        }
        // Getting the logfile content
        if($logfile != '') {
            $logfile = escapeshellcmd($logfile);
            if(stristr($logfile, ';') or substr($logfile,0,9) != '/var/log/' or stristr($logfile, '..')) {
                $log = 'Logfile path error.';
            }
            else {
                $log = '';
                if(is_readable($logfile)) {
                    if($fd = popen('tail -n 100 '.$logfile, 'r')) {
                        while (!feof($fd)) {
                            $log .= fgets($fd, 4096);
                            $n++;
                            if($n > 1000) break;
                        }
                        fclose($fd);
                    }
                } else {
                    $log = 'Unable to read '.$logfile;
                }
            }
        }
        return $log;
    }
    function _checkTcp ($host,$port) {
        $fp = @fsockopen ($host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    function _checkUdp ($host,$port) {
        $fp = @fsockopen ('udp://'.$host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    function _checkFtp ($host,$port) {
        $conn_id = @ftp_connect($host, $port);
        if($conn_id) {
            @ftp_close($conn_id);
            return true;
        } else {
            return false;
        }
    }
    /*
     Deletes Records older than n.
    */
    function _delOldRecords($type, $min, $hour=0, $days=0) {
      Deletes Records older than n.
     */
    private function _delOldRecords($type, $min, $hour=0, $days=0) {
        global $app;
        $now = time();
@@ -1798,77 +748,6 @@
        $app->dbmaster->query($sql);
    }
    /*
     * Set the state to the given level (or higher, but not lesser).
     * * If the actual state is critical and you call the method with ok,
     *   then the state is critical.
     *
     * * If the actual state is critical and you call the method with error,
     *   then the state is error.
    */
    function _setState($oldState, $newState) {
        /*
         * Calculate the weight of the old state
        */
        switch ($oldState) {
            case 'no_state': $oldInt = 0;
                break;
            case 'ok': $oldInt = 1;
                break;
            case 'unknown': $oldInt = 2;
                break;
            case 'info': $oldInt = 3;
                break;
            case 'warning': $oldInt = 4;
                break;
            case 'critical': $oldInt = 5;
                break;
            case 'error': $oldInt = 6;
                break;
        }
        /*
         * Calculate the weight of the new state
        */
        switch ($newState) {
            case 'no_state': $newInt = 0 ;
                break;
            case 'ok': $newInt = 1 ;
                break;
            case 'unknown': $newInt = 2 ;
                break;
            case 'info': $newInt = 3 ;
                break;
            case 'warning': $newInt = 4 ;
                break;
            case 'critical': $newInt = 5 ;
                break;
            case 'error': $newInt = 6 ;
                break;
        }
        /*
         * Set to the higher level
        */
        if ($newInt > $oldInt) {
            return $newState;
        }
        else {
            return $oldState;
        }
    }
    function _getIntArray($line) {
        /** The array of float found */
        $res = array();
        /* First build a array from the line */
        $data = explode(' ', $line);
        /* then check if any item is a float */
        foreach ($data as $item) {
            if ($item . '' == (int)$item . '') {
                $res[] = $item;
            }
        }
        return $res;
    }
}
?>
server/mods-available/rescue_core_module.inc.php
New file
@@ -0,0 +1,1922 @@
<?php
/*
  Copyright (c) 2007-2011, Till Brehm, projektfarm Gmbh and Oliver Vogel www.muv.com
  All rights reserved.
  Redistribution and use in source and binary forms, with or without modification,
  are permitted provided that the following conditions are met:
 * Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation
  and/or other materials provided with the distribution.
 * Neither the name of ISPConfig nor the names of its contributors
  may be used to endorse or promote products derived from this software without
  specific prior written permission.
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
class rescue_core_module {
    var $module_name = 'rescue_core_module';
    var $class_name = 'rescue_core_module';
    /* No actions at this time. maybe later... */
    var $actions_available = array();
    /**
     *  This function is called during ispconfig installation to determine
     *  if a symlink shall be created for this plugin.
     */
    function onInstall() {
        global $conf;
        return true;
    }
    /**
     * This function is called when the module is loaded
     */
    function onLoad() {
        global $app;
        /*
         * Do the monitor every n minutes and write the result to the db
         */
        $min = @date('i');
        if (($min % $this->interval) == 0) {
            $this->doMonitor();
        }
    }
    /*
      This function is called when a change in one of the registered tables is detected.
      The function then raises the events for the plugins.
     */
    function process($tablename, $action, $data) {
        // not needed
    }
// end function
    //** Get distribution identifier
    //** IMPORTANT!
    //   This is the same code as in install/lib/install.lib.php
    //   So if you change it here, you also have to change it in there!
    //   Please do not forget to remove the swriteln(); - lines here at this file
    function get_distname() {
        $distname = '';
        $distver = '';
        $distid = '';
        $distbaseid = '';
        //** Debian or Ubuntu
        if (file_exists('/etc/debian_version')) {
            if (trim(file_get_contents('/etc/debian_version')) == '4.0') {
                $distname = 'Debian';
                $distver = '4.0';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif (strstr(trim(file_get_contents('/etc/debian_version')), '5.0')) {
                $distname = 'Debian';
                $distver = 'Lenny';
                $distid = 'debian40';
                $distbaseid = 'debian';
            } elseif (strstr(trim(file_get_contents('/etc/debian_version')), '6.0') || trim(file_get_contents('/etc/debian_version')) == 'squeeze/sid') {
                $distname = 'Debian';
                $distver = 'Squeeze/Sid';
                $distid = 'debian60';
                $distbaseid = 'debian';
            } else {
                $distname = 'Debian';
                $distver = 'Unknown';
                $distid = 'debian40';
                $distbaseid = 'debian';
            }
        }
        //** OpenSuSE
        elseif (file_exists('/etc/SuSE-release')) {
            if (stristr(file_get_contents('/etc/SuSE-release'), '11.0')) {
                $distname = 'openSUSE';
                $distver = '11.0';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif (stristr(file_get_contents('/etc/SuSE-release'), '11.1')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } elseif (stristr(file_get_contents('/etc/SuSE-release'), '11.2')) {
                $distname = 'openSUSE';
                $distver = '11.1';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            } else {
                $distname = 'openSUSE';
                $distver = 'Unknown';
                $distid = 'opensuse110';
                $distbaseid = 'opensuse';
            }
        }
        //** Redhat
        elseif (file_exists('/etc/redhat-release')) {
            $content = file_get_contents('/etc/redhat-release');
            if (stristr($content, 'Fedora release 9 (Sulphur)')) {
                $distname = 'Fedora';
                $distver = '9';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'Fedora release 10 (Cambridge)')) {
                $distname = 'Fedora';
                $distver = '10';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'Fedora release 10')) {
                $distname = 'Fedora';
                $distver = '11';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'CentOS release 5.2 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.2';
                $distid = 'centos52';
                $distbaseid = 'fedora';
            } elseif (stristr($content, 'CentOS release 5.3 (Final)')) {
                $distname = 'CentOS';
                $distver = '5.3';
                $distid = 'centos53';
                $distbaseid = 'fedora';
            } else {
                $distname = 'Redhat';
                $distver = 'Unknown';
                $distid = 'fedora9';
                $distbaseid = 'fedora';
            }
        }
        //** Gentoo
        elseif (file_exists('/etc/gentoo-release')) {
            $content = file_get_contents('/etc/gentoo-release');
            preg_match_all('/([0-9]{1,2})/', $content, $version);
            $distname = 'Gentoo';
            $distver = $version[0][0] . $version[0][1];
            $distid = 'gentoo';
            $distbaseid = 'gentoo';
        } else {
            die('Unrecognized GNU/Linux distribution');
        }
        return array('name' => $distname, 'version' => $distver, 'id' => $distid, 'baseid' => $distbaseid);
    }
    /*
      This method is called every n minutes, when the module ist loaded.
      The method then does a system-monitoring
     */
    // TODO: what monitoring is done should be a config-var
    function doMonitor() {
        /* Calls the single Monitoring steps */
        $this->monitorHDQuota();
        $this->monitorServer();
        $this->monitorOSVer();
        $this->monitorIspCVer();
        $this->monitorDiskUsage();
        $this->monitorMemUsage();
        $this->monitorCpu();
        $this->monitorServices();
        if (@file_exists('/proc/user_beancounters')) {
            $this->monitorOpenVzHost();
            $this->monitorOpenVzUserBeancounter();
        }
        $this->monitorMailLog();
        $this->monitorMailWarnLog();
        $this->monitorMailErrLog();
        $this->monitorMessagesLog();
        $this->monitorISPCCronLog();
        $this->monitorFreshClamLog();
        $this->monitorClamAvLog();
        $this->monitorIspConfigLog();
        $this->monitorSystemUpdate();
        $this->monitorMailQueue();
        $this->monitorRaid();
        $this->monitorRkHunter();
        $this->monitorFail2ban();
        $this->monitorSysLog();
    }
    function monitorHDQuota() {
        global $app;
        global $conf;
        /* Initialize data array */
        $data = array();
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'harddisk_quota';
        /** The state of the harddisk_quota. */
        $state = 'ok';
        /** Fetch the data for all users */
        $dfData = shell_exec('repquota -au');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first 5 lines, process the rest
         */
        for ($i = 5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $username = $s[0];
                if (substr($username, 0, 3) == 'web') {
                    if (isset($data['user'][$username])) {
                        $data['user'][$username]['used'] += $s[2];
                        $data['user'][$username]['soft'] += $s[3];
                        $data['user'][$username]['hard'] += $s[4];
                    } else {
                        $data['user'][$username]['used'] = $s[2];
                        $data['user'][$username]['soft'] = $s[3];
                        $data['user'][$username]['hard'] = $s[4];
                    }
                }
            }
        }
        /** Fetch the data for all users */
        $dfData = shell_exec('repquota -ag');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first 5 lines, process the rest
         */
        for ($i = 5; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make a array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $groupname = $s[0];
                if (substr($groupname, 0, 6) == 'client') {
                    if (isset($data['group'][$groupname])) {
                        $data['group'][$groupname]['used'] += $s[1];
                        $data['group'][$groupname]['soft'] += $s[2];
                        $data['group'][$groupname]['hard'] += $s[3];
                    } else {
                        $data['group'][$groupname]['used'] = $s[1];
                        $data['group'][$groupname]['soft'] = $s[2];
                        $data['group'][$groupname]['hard'] = $s[3];
                    }
                }
            }
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorServer() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'server_load';
        /*
          Fetch the data into a array
         */
        $procUptime = shell_exec("cat /proc/uptime | cut -f1 -d' '");
        $data['up_days'] = floor($procUptime / 86400);
        $data['up_hours'] = floor(($procUptime - $data['up_days'] * 86400) / 3600);
        $data['up_minutes'] = floor(($procUptime - $data['up_days'] * 86400 - $data['up_hours'] * 3600) / 60);
        $data['uptime'] = shell_exec('uptime');
        $tmp = explode(',', $data['uptime'], 4);
        $tmpUser = explode(' ', trim($tmp[2]));
        $data['user_online'] = intval($tmpUser[0]);
        //* New Load Average code to fix "always zero" bug in non-english distros. NEEDS TESTING
        $loadTmp = shell_exec("cat /proc/loadavg | cut -f1-3 -d' '");
        $load = explode(' ', $loadTmp);
        $data['load_1'] = floatval(str_replace(',', '.', $load[0]));
        $data['load_5'] = floatval(str_replace(',', '.', $load[1]));
        $data['load_15'] = floatval(str_replace(',', '.', $load[2]));
        /** The state of the server-load. */
        $state = 'ok';
        if ($data['load_1'] > 20)
            $state = 'info';
        if ($data['load_1'] > 50)
            $state = 'warning';
        if ($data['load_1'] > 100)
            $state = 'critical';
        if ($data['load_1'] > 150)
            $state = 'error';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorOsVer() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'os_info';
        /*
          Fetch the data into a array
         */
        $dist = $this->get_distname();
        $data['name'] = $dist['name'];
        $data['version'] = $dist['version'];
        /* the OS has no state. It is, what it is */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorIspcVer() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'ispc_info';
        /*
          Fetch the data into a array
         */
        $data['name'] = ISPC_APP_TITLE;
        $data['version'] = ISPC_APP_VERSION;
        /* the ISPC-Version has no state. It is, what it is */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorDiskUsage() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'disk_usage';
        /** The state of the disk-usage */
        $state = 'ok';
        /** Fetch the data of ALL devices into a array (needed for monitoring!) */
        $dfData = shell_exec('df -hT');
        // split into array
        $df = explode("\n", $dfData);
        /*
         * ignore the first line, process the rest
         */
        for ($i = 1; $i <= sizeof($df); $i++) {
            if ($df[$i] != '') {
                /*
                 * Make an array of the data
                 */
                $s = preg_split('/[\s]+/', $df[$i]);
                $data[$i]['fs'] = $s[0];
                $data[$i]['type'] = $s[1];
                $data[$i]['size'] = $s[2];
                $data[$i]['used'] = $s[3];
                $data[$i]['available'] = $s[4];
                $data[$i]['percent'] = $s[5];
                $data[$i]['mounted'] = $s[6];
                /*
                 * calculate the state
                 */
                $usePercent = floatval($data[$i]['percent']);
                //* We don't want to check some filesystem which have no sensible filling levels
                switch ($data[$i]['type']) {
                    case 'iso9660':
                    case 'cramfs':
                    case 'udf':
                    case 'tmpfs':
                    case 'devtmpfs':
                    case 'udev':
                        break;
                    default:
                        if ($usePercent > 75)
                            $state = $this->_setState($state, 'info');
                        if ($usePercent > 80)
                            $state = $this->_setState($state, 'warning');
                        if ($usePercent > 90)
                            $state = $this->_setState($state, 'critical');
                        if ($usePercent > 95)
                            $state = $this->_setState($state, 'error');
                        break;
                }
            }
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMemUsage() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mem_usage';
        /*
          Fetch the data into a array
         */
        $miData = shell_exec('cat /proc/meminfo');
        $memInfo = explode("\n", $miData);
        foreach ($memInfo as $line) {
            $part = preg_split('/:/', $line);
            $key = trim($part[0]);
            $tmp = explode(' ', trim($part[1]));
            $value = 0;
            if ($tmp[1] == 'kB')
                $value = $tmp[0] * 1024;
            $data[$key] = $value;
        }
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorCpu() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'cpu_info';
        /*
          Fetch the data into a array
         */
        if (file_exists('/proc/cpuinfo')) {
            $cpuData = shell_exec('cat /proc/cpuinfo');
            $cpuInfo = explode("\n", $cpuData);
            $processor = 0;
            foreach ($cpuInfo as $line) {
                $part = preg_split('/:/', $line);
                $key = trim($part[0]);
                $value = trim($part[1]);
                if ($key == 'processor')
                    $processor = intval($value);
                if ($key != '')
                    $data[$key . ' ' . $processor] = $value;
            }
            /* the cpu has no state. It is, what it is */
            $state = 'no_state';
        } else {
            /*
             * It is not Linux, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorServices() {
        global $app;
        global $conf;
        /** the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** get the "active" Services of the server from the DB */
        $services = $app->dbmaster->queryOneRecord('SELECT * FROM server WHERE server_id = ' . $server_id);
        /* The type of the Monitor-data */
        $type = 'services';
        /** the State of the monitoring */
        /* ok, if ALL active services are running,
         * error, if not
         * There is no other state!
         */
        $state = 'ok';
        /* Monitor Webserver */
        $data['webserver'] = -1; // unknown - not needed
        if ($services['web_server'] == 1) {
            if ($this->_checkTcp('localhost', 80)) {
                $data['webserver'] = 1;
            } else {
                $data['webserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor FTP-Server */
        $data['ftpserver'] = -1; // unknown - not needed
        if ($services['file_server'] == 1) {
            if ($this->_checkFtp('localhost', 21)) {
                $data['ftpserver'] = 1;
            } else {
                $data['ftpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor SMTP-Server */
        $data['smtpserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 25)) {
                $data['smtpserver'] = 1;
            } else {
                $data['smtpserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor POP3-Server */
        $data['pop3server'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 110)) {
                $data['pop3server'] = 1;
            } else {
                $data['pop3server'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor IMAP-Server */
        $data['imapserver'] = -1; // unknown - not needed
        if ($services['mail_server'] == 1) {
            if ($this->_checkTcp('localhost', 143)) {
                $data['imapserver'] = 1;
            } else {
                $data['imapserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor BIND-Server */
        $data['bindserver'] = -1; // unknown - not needed
        if ($services['dns_server'] == 1) {
            if ($this->_checkTcp('localhost', 53)) {
                $data['bindserver'] = 1;
            } else {
                $data['bindserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /* Monitor MySQL Server */
        $data['mysqlserver'] = -1; // unknown - not needed
        if ($services['db_server'] == 1) {
            if ($this->_checkTcp('localhost', 3306)) {
                $data['mysqlserver'] = 1;
            } else {
                $data['mysqlserver'] = 0;
                $state = 'error'; // because service is down
            }
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorOpenVzHost() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_veinfo';
        /*
          Fetch the data into a array
         */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeInfo();
        /* the VE-Info has no state. It is, what it is */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorOpenVzUserBeancounter() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'openvz_beancounter';
        /*
          Fetch the data into a array
         */
        $app->load(openvz_tools);
        $openVzTools = new openvz_tools();
        $data = $openVzTools->getOpenVzVeBeanCounter();
        /* calculate the state of the beancounter */
        if ($data == '') {
            $state = 'no_state';
        } else {
            $state = 'ok';
            /* transfer this output-string into a array */
            $test = explode("\n", $data);
            /* the first list of the output is not needed */
            array_shift($test);
            /* now process all items of the rest */
            foreach ($test as $item) {
                /*
                 * eliminate all doubled spaces and spaces at the beginning and end
                 */
                while (strpos($item, '  ') !== false) {
                    $item = str_replace('  ', ' ', $item);
                }
                $item = trim($item);
                /*
                 * The failcounter is the LAST
                 */
                if ($item != '') {
                    $tmp = explode(' ', $item);
                    $failCounter = $tmp[sizeof($tmp) - 1];
                    if ($failCounter > 0)
                        $state = 'info';
                    if ($failCounter > 50)
                        $state = 'warning';
                    if ($failCounter > 200)
                        $state = 'critical';
                    if ($failCounter > 10000)
                        $state = 'error';
                }
            }
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorSystemUpdate() {
        /*
         *  This monitoring is expensive, so do it only once an hour
         */
        $min = date('i');
        if ($min != 0)
            return;
        /*
         * OK - here we go...
         */
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'system_update';
        /* This monitoring is only available on Debian or Ubuntu */
        if (file_exists('/etc/debian_version')) {
            /*
             * first update the "apt database"
             */
            shell_exec('apt-get update');
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
             */
            $aptData = shell_exec('apt-get -s -qq dist-upgrade');
            if ($aptData == '') {
                /* There is nothing to update! */
                $state = 'ok';
            } else {
                /*
                 * There is something to update! this is in most cases not critical, so we can
                 * do a system-update once a month or so...
                 */
                $state = 'info';
            }
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('apt-get -s -q dist-upgrade');
        } elseif (file_exists('/etc/gentoo-release')) {
            /*
             * first update the portage tree
             */
            // In keeping with gentoo's rsync policy, don't update to frequently (every four hours - taken from http://www.gentoo.org/doc/en/source_mirrors.xml)
            $do_update = true;
            if (file_exists('/usr/portage/metadata/timestamp.chk')) {
                $datetime = file_get_contents('/usr/portage/metadata/timestamp.chk');
                $datetime = trim($datetime);
                $dstamp = strtotime($datetime);
                if ($dstamp) {
                    $checkat = $dstamp + 14400; // + 4hours
                    if (mktime() < $checkat) {
                        $do_update = false;
                    }
                }
            }
            if ($do_update) {
                shell_exec('emerge --sync --quiet');
            }
            /*
             * Then test the upgrade.
             * if there is any output, then there is a needed update
             */
            $emergeData = shell_exec('glsa-check -t affected');
            if ($emergeData == '') {
                /* There is nothing to update! */
                $state = 'ok';
                $data['output'] = 'No unapplied GLSA\'s found on the system.';
            } else {
                /* There is something to update! */
                $state = 'info';
                $data['output'] = shell_exec('glsa-check -pv --nocolor affected 2>/dev/null');
            }
        } else {
            /*
             * It is not Debian/Ubuntu, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMailQueue() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'mailq';
        /* Get the data from the mailq */
        $data['output'] = shell_exec('mailq');
        /*
         *  The last line has more informations
         */
        $tmp = explode("\n", $data['output']);
        $more = $tmp[sizeof($tmp) - 1];
        $this->_getIntArray($more);
        $data['bytes'] = $res[0];
        $data['requests'] = $res[1];
        /** The state of the mailq. */
        $state = 'ok';
        if ($data['requests'] > 2000)
            $state = 'info';
        if ($data['requests'] > 5000)
            $state = 'warning';
        if ($data['requests'] > 8000)
            $state = 'critical';
        if ($data['requests'] > 10000)
            $state = 'error';
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorRaid() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'raid_state';
        /*
         * We support several RAID types, but if we can't find any of them, we have no data
         */
        $state = 'no_state';
        $data['output'] = '';
        /*
         * Check, if Software-RAID is enabled
         */
        if (file_exists('/proc/mdstat')) {
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('cat /proc/mdstat');
            /*
             * Then calc the state.
             */
            $tmp = explode("\n", $data['output']);
            $state = 'ok';
            for ($i = 0; $i < sizeof($tmp); $i++) {
                /* fetch the next line */
                $line = $tmp[$i];
                if ((strpos($line, '[U_]') !== false) || (strpos($line, '[_U]') !== false)) {
                    /* One Disk is not working.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of critical
                     */
                    $nextLine = $tmp[$i + 1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'critical');
                    } else {
                        $state = $this->_setState($state, 'info');
                    }
                }
                if (strpos($line, '[__]') !== false) {
                    /* both Disk are not working */
                    $state = $this->_setState($state, 'error');
                }
                if (strpos($line, '[UU]') !== false) {
                    /* The disks are OK.
                     * if the next line starts with "[>" or "[=" then
                     * recovery (resync) is in state and the state is
                     * information instead of ok
                     */
                    $nextLine = $tmp[$i + 1];
                    if ((strpos($nextLine, '[>') === false) && (strpos($nextLine, '[=') === false)) {
                        $state = $this->_setState($state, 'ok');
                    } else {
                        $state = $this->_setState($state, 'info');
                    }
                }
            }
        }
        /*
         * Check, if we have mpt-status installed (LSIsoftware-raid)
         */
        if (file_exists('/proc/mpt/summary')) {
            system('which mpt-status', $retval);
            if ($retval === 0) {
                /*
                 * Fetch the output
                 */
                $data['output'] = shell_exec('mpt-status --autoload -n');
                /*
                 * Then calc the state.
                 */
                $state = 'ok';
                foreach ($data['output'] as $item) {
                    /*
                     * The output contains information for every RAID and every HDD.
                     * We only need the state of the RAID
                     */
                    if (strpos($item, 'raidlevel:') !== false) {
                        /*
                         * We found a raid, process the state of it
                         */
                        if (strpos($item, ' ONLINE ') !== false) {
                            $this->_setState($state, 'ok');
                        } elseif (strpos($item, ' OPTIMAL ') !== false) {
                            $this->_setState($state, 'ok');
                        } elseif (strpos($item, ' INITIAL ') !== false) {
                            $this->_setState($state, 'info');
                        } elseif (strpos($item, ' INACTIVE ') !== false) {
                            $this->_setState($state, 'critical');
                        } elseif (strpos($item, ' RESYNC ') !== false) {
                            $this->_setState($state, 'info');
                        } elseif (strpos($item, ' DEGRADED ') !== false) {
                            $this->_setState($state, 'critical');
                        } else {
                            /* we don't know the state. so we set the state to critical, that the
                             * admin is warned, that something is wrong
                             */
                            $this->_setState($state, 'critical');
                        }
                    }
                }
            }
        }
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorRkHunter() {
        /*
         *  This monitoring is expensive, so do it only once a day
         */
        $min = date('i');
        $hour = date('H');
        if (!($min == 0 && $hour == 23))
            return;
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'rkhunter';
        /* This monitoring is only available if rkhunter is installed */
        system('which rkhunter', $retval);
        if ($retval === 0) {
            /*
             * Fetch the output
             */
            $data['output'] = shell_exec('rkhunter --update --checkall --nocolors --skip-keypress');
            /*
             * At this moment, there is no state (maybe later)
             */
            $state = 'no_state';
        } else {
            /*
             * rkhunter is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data['output'] = '';
        }
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorFail2ban() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_fail2ban';
        /* This monitoring is only available if fail2ban is installed */
        system('which fail2ban-client', $retval); // Debian, Ubuntu, Fedora
        if ($retval !== 0)
            system('which fail2ban', $retval); // CentOS
        if ($retval === 0) {
            /*  Get the data of the log */
            $data = $this->_getLogData($type);
            /*
             * At this moment, there is no state (maybe later)
             */
            $state = 'no_state';
        } else {
            /*
             * fail2ban is not installed, so there is no data and no state
             *
             * no_state, NOT unknown, because "unknown" is shown as state
             * inside the GUI. no_state is hidden.
             *
             * We have to write NO DATA inside the DB, because the GUI
             * could not know, if there is any dat, or not...
             */
            $state = 'no_state';
            $data = '';
        }
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorSysLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'sys_log';
        /*
         * is there any warning or error for this server?
         */
        $state = 'ok';
        $dbData = $app->dbmaster->queryAllRecords('SELECT loglevel FROM sys_log WHERE server_id = ' . $server_id . ' AND loglevel > 0');
        if (is_array($dbData)) {
            foreach ($dbData as $item) {
                if ($item['loglevel'] == 1)
                    $state = $this->_setState($state, 'warning');
                if ($item['loglevel'] == 2)
                    $state = $this->_setState($state, 'error');
            }
        }
        /** There is no monitor-data because the data is in the sys_log table */
        $data['output'] = '';
        /*
         * Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMailLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMailWarnLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_warn';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMailErrLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_mail_err';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorMessagesLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_messages';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorISPCCronLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispc_cron';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /*
         * actually this info has no state.
         * maybe someone knows better...???...
         */
        $state = 'no_state';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorFreshClamLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_freshclam';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        /* Get the data from the LAST log-Entry.
         * if there can be found:
         * WARNING: Your ClamAV installation is OUTDATED!
         * then the clamav is outdated. This is a warning!
         */
        $state = 'ok';
        $tmp = explode("\n", $data);
        $lastLog = array();
        if ($tmp[sizeof($tmp) - 1] == '') {
            /* the log ends with an empty line remove this */
            array_pop($tmp);
        }
        if (strpos($tmp[sizeof($tmp) - 1], '-------------') !== false) {
            /* the log ends with "-----..." remove this */
            array_pop($tmp);
        }
        for ($i = sizeof($tmp) - 1; $i > 0; $i--) {
            if (strpos($tmp[$i], '---------') === false) {
                /* no delimiter found, so add this to the last-log */
                $lastLog[] = $tmp[$i];
            } else {
                /* delimiter found, so there is no more line left! */
                break;
            }
        }
        /*
         * Now we have the last log in the array.
         * Check if the outdated-string is found...
         */
        foreach ($lastLog as $line) {
            if (strpos(strtolower($line), 'outdated') !== false) {
                /*
                 * Outdatet is only info, because if we set this to warning, the server is
                 * as long in state warning, as there is a new version of ClamAv which takes
                 * sometimes weeks!
                 */
                $state = $this->_setState($state, 'info');
            }
        }
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorClamAvLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_clamav';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function monitorIspConfigLog() {
        global $app;
        global $conf;
        /* the id of the server as int */
        $server_id = intval($conf['server_id']);
        /** The type of the data */
        $type = 'log_ispconfig';
        /* Get the data of the log */
        $data = $this->_getLogData($type);
        // Todo: the state should be calculated.
        $state = 'ok';
        /*
          Insert the data into the database
         */
        $sql = 'INSERT INTO monitor_data (server_id, type, created, data, state) ' .
                'VALUES (' .
                $server_id . ', ' .
                "'" . $app->dbmaster->quote($type) . "', " .
                time() . ', ' .
                "'" . $app->dbmaster->quote(serialize($data)) . "', " .
                "'" . $state . "'" .
                ')';
        $app->dbmaster->query($sql);
        /* The new data is written, now we can delete the old one */
        $this->_delOldRecords($type, 4);
    }
    function _getLogData($log) {
        global $conf;
        $dist = '';
        $logfile = '';
        if (@is_file('/etc/debian_version')) {
            $dist = 'debian';
        } elseif (@is_file('/etc/redhat-release')) {
            $dist = 'redhat';
        } elseif (@is_file('/etc/SuSE-release')) {
            $dist = 'suse';
        } elseif (@is_file('/etc/gentoo-release')) {
            $dist = 'gentoo';
        }
        switch ($log) {
            case 'log_mail':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.log';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.info';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_mail_warn':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.warn';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.warn';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_mail_err':
                if ($dist == 'debian') {
                    $logfile = '/var/log/mail.err';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/maillog';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/mail.err';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/maillog';
                }
                break;
            case 'log_messages':
                if ($dist == 'debian') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/messages';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/messages';
                }
                break;
            case 'log_ispc_cron':
                if ($dist == 'debian') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'redhat') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'suse') {
                    $logfile = $conf['ispconfig_log_dir'] . '/cron.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/cron';
                }
                break;
            case 'log_freshclam':
                if ($dist == 'debian') {
                    $logfile = '/var/log/clamav/freshclam.log';
                } elseif ($dist == 'redhat') {
                    $logfile = (is_file('/var/log/clamav/freshclam.log') ? '/var/log/clamav/freshclam.log' : '/var/log/freshclam.log');
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/freshclam.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/clamav/freshclam.log';
                }
                break;
            case 'log_clamav':
                if ($dist == 'debian') {
                    $logfile = '/var/log/clamav/clamav.log';
                } elseif ($dist == 'redhat') {
                    $logfile = (is_file('/var/log/clamav/clamd.log') ? '/var/log/clamav/clamd.log' : '/var/log/maillog');
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/clamd.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/clamav/clamd.log';
                }
                break;
            case 'log_fail2ban':
                if ($dist == 'debian') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'redhat') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'suse') {
                    $logfile = '/var/log/fail2ban.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = '/var/log/fail2ban.log';
                }
                break;
            case 'log_ispconfig':
                if ($dist == 'debian') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'redhat') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'suse') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                } elseif ($dist == 'gentoo') {
                    $logfile = $conf['ispconfig_log_dir'] . '/ispconfig.log';
                }
                break;
            default:
                $logfile = '';
                break;
        }
        // Getting the logfile content
        if ($logfile != '') {
            $logfile = escapeshellcmd($logfile);
            if (stristr($logfile, ';') or substr($logfile, 0, 9) != '/var/log/' or stristr($logfile, '..')) {
                $log = 'Logfile path error.';
            } else {
                $log = '';
                if (is_readable($logfile)) {
                    if ($fd = popen('tail -n 100 ' . $logfile, 'r')) {
                        while (!feof($fd)) {
                            $log .= fgets($fd, 4096);
                            $n++;
                            if ($n > 1000)
                                break;
                        }
                        fclose($fd);
                    }
                } else {
                    $log = 'Unable to read ' . $logfile;
                }
            }
        }
        return $log;
    }
    function _checkTcp($host, $port) {
        $fp = @fsockopen($host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    function _checkUdp($host, $port) {
        $fp = @fsockopen('udp://' . $host, $port, $errno, $errstr, 2);
        if ($fp) {
            fclose($fp);
            return true;
        } else {
            return false;
        }
    }
    function _checkFtp($host, $port) {
        $conn_id = @ftp_connect($host, $port);
        if ($conn_id) {
            @ftp_close($conn_id);
            return true;
        } else {
            return false;
        }
    }
    /*
      Deletes Records older than n.
     */
    function _delOldRecords($type, $min, $hour=0, $days=0) {
        global $app;
        $now = time();
        $old = $now - ($min * 60) - ($hour * 60 * 60) - ($days * 24 * 60 * 60);
        $sql = 'DELETE FROM monitor_data ' .
                'WHERE ' .
                'type =' . "'" . $app->dbmaster->quote($type) . "' " .
                'AND ' .
                'created < ' . $old;
        $app->dbmaster->query($sql);
    }
    /*
     * Set the state to the given level (or higher, but not lesser).
     * * If the actual state is critical and you call the method with ok,
     *   then the state is critical.
     *
     * * If the actual state is critical and you call the method with error,
     *   then the state is error.
     */
    function _setState($oldState, $newState) {
        /*
         * Calculate the weight of the old state
         */
        switch ($oldState) {
            case 'no_state': $oldInt = 0;
                break;
            case 'ok': $oldInt = 1;
                break;
            case 'unknown': $oldInt = 2;
                break;
            case 'info': $oldInt = 3;
                break;
            case 'warning': $oldInt = 4;
                break;
            case 'critical': $oldInt = 5;
                break;
            case 'error': $oldInt = 6;
                break;
        }
        /*
         * Calculate the weight of the new state
         */
        switch ($newState) {
            case 'no_state': $newInt = 0;
                break;
            case 'ok': $newInt = 1;
                break;
            case 'unknown': $newInt = 2;
                break;
            case 'info': $newInt = 3;
                break;
            case 'warning': $newInt = 4;
                break;
            case 'critical': $newInt = 5;
                break;
            case 'error': $newInt = 6;
                break;
        }
        /*
         * Set to the higher level
         */
        if ($newInt > $oldInt) {
            return $newState;
        } else {
            return $oldState;
        }
    }
    function _getIntArray($line) {
        /** The array of float found */
        $res = array();
        /* First build a array from the line */
        $data = explode(' ', $line);
        /* then check if any item is a float */
        foreach ($data as $item) {
            if ($item . '' == (int) $item . '') {
                $res[] = $item;
            }
        }
        return $res;
    }
}
?>