From 9e64dc2debfa1c7410f82bf71f4d10856751e258 Mon Sep 17 00:00:00 2001
From: Aleksander Machniak <alec@alec.pl>
Date: Fri, 20 May 2016 08:36:45 -0400
Subject: [PATCH] Remove application/x-tar file extension test as it might not exist in nginx config (#5253)
---
UPGRADING | 178 +++++++++++++++++++++-------------------------------------
1 files changed, 65 insertions(+), 113 deletions(-)
diff --git a/UPGRADING b/UPGRADING
index 6362e0c..fe0ad4d 100644
--- a/UPGRADING
+++ b/UPGRADING
@@ -1,127 +1,79 @@
UPGRADING instructions
======================
-First you should remove all subfolders from /program/localization/
-because most language codes have changed in 0.2-alpha. This way you
-can make sure that no old localization files remain on your disk.
+Follow these instructions if upgrading from a previous version
+of Roundcube Webmail. We recommend to carefully backup the existing
+installation as well as the database before going through the following steps.
-Then follow these instructions if upgrading from a previous version
-of RoundCube Webmail.
+Using the update script
+-----------------------
+There is a shell script (for unix based systems) that does the job for you.
+To use it, unpack the archive of the new Roundcube version to a temporary location
+(don't replace the Roundcube installation you want to update)
+and cd into that directory. From there, run the following command in a shell:
+
+ ./bin/installto.sh <TARGET-FOLDER>
+
+For <TARGET-FOLDER> you specify the path to the Roundcube installation
+which should be updated. The update script will then copy all new files to the
+target location and check and update the configuration and database schema.
+After all is done, the temporary folder with the new Roundcube files can be
+removed again.
+
+WARNING: See Post-Upgrade Activities section below.
+
+
+Updating manually
+-----------------
+If you don't have shell access to the Roundcube installation or if not running
+it on a unix system, you need to do the following operations by hand:
1. Replace index.php and all files in
- ./bin/
- ./SQL/
- ./program/
- ./installer/
- - ./skins/default/
- - ./plugins/
-2. Run ./bin/update.sh from the commandline OR
- open http://url-to-roundcube/installer/ in a browser. To enable
- the latter one, you have to temporary set 'enable_installer' to true
- in your local config/main.inc.php file.
-3. Let the update script/installer check your configuration and
- update your config files as suggested by the updater.
-4. If suggested by the update script, run all commands in
- ./SQL/[yourdbtype].update.sql that are superscribed with the
- currently installed version number.
-5. Make sure 'enable_installer' is set to false again.
-6. Check .htaccess settings (some php settings could become required)
+2. Replace the configuration defaults files:
+ - config/defaults.inc.php
+ - config/mimetypes.php
+3. rsync the contents of the following folders from your installation
+ directory into the target folder:
+ ./skins/
+ ./plugins/
+ ./vendor/
+4a. If you previously installed plugins through composer, update dependencies
+ by running `php composer.phar update --no-dev`
+4b. Install/update dependencies using composer:
+ - get composer from https://getcomposer.org/download/
+ - rename the composer.json-dist file into composer.json
+ - if you want to use LDAP address books, enable the LDAP libraries in your
+ composer.json file by moving the items from "suggest" to the "require"
+ section (remove the explanation texts after the version!).
+ - run `php composer.phar install --no-dev`
+5. Run `./bin/update.sh` from the commandline OR
+ open http://url-to-roundcube/installer/ in a browser and choose "3 Test config".
+ To enable the latter one, you have to temporary set 'enable_installer'
+ to true in your local config/config.inc.php file.
+ WARNING: See SQLite database upgrade below.
+6. Let the update script/installer check your configuration and
+ update your config files and database schema as suggested by the updater.
+7. Make sure 'enable_installer' is set to false again.
+8. See Post-Upgrade Activities section.
-For manually upgrading your RoundCube installation follow the instructions
-that match the currently installed version:
+Post-Upgrade Activities
+-----------------------
+1. Check .htaccess settings (some php settings could become required)
+2. If you're using build-in addressbook, run indexing script /bin/indexcontacts.sh.
+3. When upgrading from version older than 0.6-beta you should make sure
+ your folder settings contain namespace prefix. For example Courier users
+ should add INBOX. prefix to folder names in main configuration file.
+4. Check system requirements in INSTALL file.
-from version 0.2-alpha
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /installer/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql
- below the line "-- Updates from version 0.2-alpha"
-* check the config/main.inc.php.dist for new configuration
- options and add them to your config
- WARNING: 'skin_path' option was replaced by 'skin' option
-* WARNING: 'db_backend' option has been removed, now only
- PEAR::MDB2 driver is supported
+SQLite database upgrade
+-----------------------
+Versions older than 0.9 were supporting SQLite v2 only. Newer versions require
+database in v3 format. The best what you can do is to convert database file
+to the new format using command line tools:
-
-from version 0.1.1
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql
- below the line "-- Updates from version 0.1.1"
-* check the config/main.inc.php.dist for new configuration
- options and add them to your config
-
-
-from version 0.1-stable
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql
-* check the config/main.inc.php.dist for new configuration options
- and add them to your config
-
-
-from version 0.1-rc2
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql
-
-
-from version 0.1-rc1
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* If you have LDAP servers configured you should re-configure
- the config entries using the template given in /config/main.inc.php.dist
-
-
-from version 0.1-beta2
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql or
- re-initalize the database with [yourdbtype].initial.sql
-* add these lines to /config/main.inc.php
- $rcmail_config['draft_autosave'] = 300;
- $rcmail_config['date_today'] = 'H:i';
-* If you have LDAP servers configured you should re-configure
- the config entries using the template given in /config/main.inc.php.dist
-
-
-form version 0.1-beta
-----------------------------------------
-* replace index.php
-* replace all files in folder /bin/
-* replace all files in folder /program/
-* replace all files in folder /skins/default/
-* run all commands in SQL/[yourdbtype].update.sql or
- re-initalize the database with [yourdbtype].initial.sql
-* add this line to /config/db.inc.php
- $rcmail_config['db_persistent'] = false;
-* add these lines to /config/main.inc.php
- $rcmail_config['drafts_mbox'] = 'Drafts';
- $rcmail_config['junk_mbox'] = 'Junk';
- $rcmail_config['product_name'] = 'RoundCube Webmail';
- $rcmail_config['read_when_deleted'] = false;
- $rcmail_config['enable_spellcheck'] = false;
- $rcmail_config['protect_default_folders'] = false;
-* replace the following line from /config/main.inc.php
- @include($_SERVER['HTTP_HOST'].'.inc.php');
- with
- $rcmail_config['include_host_config'] = false;
+sqlite OLD.DB .dump | sqlite3 NEW.DB
--
Gitblit v1.9.1